Re: Windows 2000 Server RRAS Won't Start
From: dew (ascdew_at_hotmail.com)
Date: 03/07/04
- Next message: Bill Grant: "Re: master browse list"
- Previous message: anonymous_at_discussions.microsoft.com: "Re: How to configure a Terminal Server behind an SBS 2003."
- Messages sorted by: [ date ] [ thread ]
Date: 6 Mar 2004 16:42:15 -0800
To all users who have upgraded Win2000 to Win2003.
The Marc Reynolds fix is the correct solution - but you need to add
the following step before re-registering the dll's:
The win2003 upgrade is flawed - it does not upgrade the programs in
this folder
C:\Program Files\Common Files\System\Ole
We also had a clean win2003 install - from that we replaced all the
files in the upgraded win2000 server folder with the correct files
from a clean win2003 install. This fixes the problem.
After replacing the files - then register the correct dll's and
re-enable RRAS. It may also work to just replace those two dll's but
we did not test this.
>-----Original Message-----
>
>1. Expand the dnary.md_ and ias.md_ files from the Server CD and
copy them
>to the
>winnt\system32\ias folder after backing up the old ones.
>2. Run the following commands from the command prompt:
> C:\Program Files\Common Files\System\Ole DB>regsvr32 oledb32r.dll
> C:\Program Files\Common Files\System\Ole DB>regsvr32 oledb32.dll
>3. Attempt to manually restart the RRAS services.
>4. Set the RRAS service to start automatically and reboot.
>--
>
>Thanks,
>Marc Reynolds
"Elizabeth Strachan" <anonymous@discussions.microsoft.com> wrote in message news:<047c01c3fde2$7f5ec7a0$7d02280a@phx.gbl>...
> RDMS,
> I too just performed a Win2K to Win2003 upgrade on what
> is essentially a 2 month old clean install of Windows
> 2000 Server.
> I was very unimpressed with the upgrade and a multitude
> of errors has occurred including the one that you are
> having.
>
> I found that it appeared to be caused by a problem with
> the OLEDB32.dll file. In the C:\WINNT\setuperr.log file
> I found that it had not registered properly. After much
> stuffing around looking at various posts I decided to
> download and install MDAC 2.8. This did not fix the
> problem. I then ran MDAC checker and was suprised to
> find that file at an older version. I uncompressed the
> MDAC 2.8 download and found that it too had the wrong
> file.
> End result was that I went back to the Win2003 CD and
> expanded the oledb32.dll file and copied it over the old
> one in "C:\program files\common files\system\ole db". I
> then reregistered it using regsvr32. All of this seemed
> to fix that one particular problem.
>
> If you are still having problems....The only other thing
> I did along the way was also replace the 2 mdb files in
> the c:\winnt\system32\ias\ folder with the ones from the
> cd. I don't think this made any difference though
> because I wasn't trying to use IAS for authentication.
>
> Hope this helps
> Sincerley,
> Elizabeth Strachan
>
> >-----Original Message-----
> >having similar problem after upgrading from 2000. Are
> you
> >also getting errors to the datastore?
> >
> >>-----Original Message-----
> >>
> >>The RRAS service will not start. The following errors
> are
> >>logged in event viewer:
> >>
> >>Event 20152
> >>
> >>The currently configured authentication provider failed
> to
> >>load and initialize successfully. The specified
> procedure
> >>could not be found.
> >>
> >>Followed by:
> >>
> >>Event 7024
> >>
> >>The Routing and Remote Access service terminated with
> >>service-specific error 127.
> >>
> >>Has anyone experienced this problem?
> >>.
> >>
> >.
> >
- Next message: Bill Grant: "Re: master browse list"
- Previous message: anonymous_at_discussions.microsoft.com: "Re: How to configure a Terminal Server behind an SBS 2003."
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
