WAN LAN 2 Nic's

From: Henry Lifton (henlif_at_elsfl.com)
Date: 02/07/04 

Date: Sat, 07 Feb 2004 11:06:26 -0800

Problem

Windows 2000 Advanced Server. Static IP address with 5 public ip
addresses.

Internal lan 192.168.x.x

Cayman Netopia 3346 router.

Server using ip of 192.168.0.101. gateway is public gateway 68.153.xxx.xxx

internal lan can connect to server and internet. Lan machines can only
connect to internal lan.

tried to setup the other nic to a public address and point the internal lan
nic to it as gateway.

Nothing seems to work

Any help would be appreciated

Thanks
Henry

Relevant Pages

  • Re: Member Server with Interface in Permiter Network and also interface on internal LAN
    ... total agreement with Les. ... > To host your web site, you could dmz the web server off the pix, and use ... > Les Connor [SBS MVP] ... >> Internal LAN ...
    (microsoft.public.windows.server.sbs)
  • Re: setting up an IIS webserver
    ... Yes there is an internal LAN and the server does have a 2nd NIC..... ... since the server can ony have the one default gateway that points to the ... "Grant Taylor" wrote: ...
    (microsoft.public.inetserver.iis)
  • RE: Remote Administration using RDP issue
    ... I did again resolve it the first time by updating the Dell Intel Lan Driver ... On the server went to Terminal Server Managment and found ... I suspect something is corrupt but dont want to compromise internal Lan ... I'm thinking of installing Server 2003 SP2 as a possible fix but concerned ...
    (microsoft.public.windows.server.sbs)
  • RE: DMZ Setup With ISA 2004
    ... Bearing in mind what you menitoned about the cross-over connection, ... to the internal lan for DNS/AD/RDP. ... ISA Server 2004 does not support multiple external connections. ...
    (microsoft.public.isa.configuration)
  • Re: Exchange, Security, DMZ
    ... My main concern is Security, not scalability. ... I'm just trying to protect my internal LAN. ... smtp relay server in the DMZ is the way to go, but am curious as to what ...
    (microsoft.public.exchange.setup)