Re: Upgrade of NT 4.0 to Windows 2003 Domain

Tech-Archive recommends: Speed Up your PC by fixing your registry

Thank you for your prompt response. Agreed, that would be the way to
go, except...all copies of NT 4.0 were purchased OEM and it cannot be
upgraded to Win2k03, so I have to stick with the plan I devised and set
out below. Anyone have any ideas given the scenario I set forth?
Thanks

Danny Sanders wrote:
Here's the scenario. I have an NT 4.0 BDC (PDC apparently bit the dust
before I started here, so they're running off the BDC).


Promote the BDC to PDC. It will complain but it will work.

use. I formatted it and installed a fresh copy of Windows 2003
Standard server. Configured the server with the wizard to have DNS,
DHCP, and AD. In the DNS scope, I used the same IP schema as the old

Format and install NT 4.0 on it as a BDC while connected to your existing
domain, promote to PDC then upgrade to Win 2k3 and AD.

See:
http://support.microsoft.com/kb/326209/en-us


DNS must be set up right.
See:
http://support.microsoft.com/kb/814591/en-us

http://support.microsoft.com/kb/825036/en-us\

http://support.microsoft.com/kb/323380/en-us


. By upgrading the domain you won't have to worry about the migration wizard
creating you accounts.


hth
DDS W 2k MVP MCSE

<danielle@xxxxxxxxxxxxx> wrote in message
news:1149084229.614399.129570@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Here's the scenario. I have an NT 4.0 BDC (PDC apparently bit the dust
before I started here, so they're running off the BDC). I have a
server that used to be used for a Citrix backup, but was no longer in
use. I formatted it and installed a fresh copy of Windows 2003
Standard server. Configured the server with the wizard to have DNS,
DHCP, and AD. In the DNS scope, I used the same IP schema as the old
domain had. I can ping all servers from the Windows 2003 server, but
the NT side of things cannot see the IP address. I attempted to add a
trust for the old domain, but received errors on both ends. I'm
thinking I cannot go forward with the trust until ping works between
the servers. Additionally, we have a brand new server which will be
installed with Win2k03 and Exchange 2k03. We then plan to use the
Migration Wizard to move the old Exchange 5.5 clients to Exchange 2k03,
which should automaticallly create the AD accounts as well. Can anyone
help me get past this first step? Thanks.


.

Relevant Pages

  • Re: NT to W2K3 Migration
    ... How to Upgrade from Windows NT Server 4.0 ... Best Practice Active Directory Design for Managing Windows Networks ... ensure that you have designed a DNS ...
    (microsoft.public.windows.server.active_directory)
  • Re: Migrating NT4 to Windows 2003
    ... Migrating from Windows NT Server 4.0 to Windows Server 2003 ... How to Upgrade from Windows NT Server 4.0 ... Best Practice Active Directory Design for Managing Windows Networks ... ensure that you have designed a DNS ...
    (microsoft.public.windows.server.active_directory)
  • Re: NT to W2K3 Migration
    ... You cannot just promote a member server to AD. ... upgrade your PDC to windows 2000 or 2003, whichever flavor of AD you want to ... Upgrading from Windows NT Server 4.0 ... ensure that you have designed a DNS ...
    (microsoft.public.windows.server.active_directory)
  • Re: Native 2003 mode and NT4 workstations?
    ... Migrating from Windows NT Server 4.0 to Windows Server 2003 ... How to Upgrade from Windows NT Server 4.0 ... ensure that you have designed a DNS ...
    (microsoft.public.windows.server.active_directory)
  • RE: NT 4.0 to Windows Server 2003 Upgrade
    ... 325851 How To Set Up ADMT for a Windows NT 4.0-to-Windows Server 2003 ... NT 4.0 to Windows Server 2003 Upgrade ... | the AD wizard, my client systems are still able to log into the domain ... |> | would it be better to configure DNS through the AD wizard? ...
    (microsoft.public.windows.server.migration)