Re: Can't Get DC List W32tm /monitor


Here is the TCP/IP Settings for BOTH SERVERS:
C:\Program Files\Support Tools>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : dc1
Primary Dns Suffix . . . . . . . : mydomain.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : mydomain.com

Ethernet adapter Broadcom-1:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE
(NDIS VBD Client)
Physical Address. . . . . . . . . : 00-19-B9-D9-70-BF
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.1.10.20
Subnet Mask . . . . . . . . . . . : 255.0.0.0
Default Gateway . . . . . . . . . : 10.1.10.1
DNS Servers . . . . . . . . . . . : 10.1.10.20
10.1.10.200

C:\>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : DC2
Primary Dns Suffix . . . . . . . : mydomain.com
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : mydomain.com

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC7760 Gigabit Server Adapter
Physical Address. . . . . . . . . : 00-11-85-D4-34-F4
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.1.10.200
Subnet Mask . . . . . . . . . . . : 255.0.0.0
Default Gateway . . . . . . . . . : 10.1.10.1
DNS Servers . . . . . . . . . . . : 10.1.10.20
10.1.10.200
Ran on DC2
============
C:\>w32tm /monitor
dc1.Mydomain.com *** PDC *** [10.1.10.20]:
ICMP: 0ms delay.
NTP: +0.0000000s offset from dc1.Mydomain.com
RefID: time-a.timefreq.bldrdoc.gov [132.163.4.101]
DC2.Mydomain.com [10.1.10.200]:
ICMP: 0ms delay.
NTP: +0.0005987s offset from dc1.Mydomain.com
RefID: dc1.Mydomain.com [10.1.10.20]

Ran on DC1
==========
C:\Program Files\Support Tools>w32tm /monitor
dc1.Mydomain.com *** PDC *** [10.1.10.20]:
ICMP: 0ms delay.
NTP: +0.0000000s offset from dc1.Mydomain.com
RefID: time-a.timefreq.bldrdoc.gov [132.163.4.101]
DC2.Mydomain.com [10.1.10.200]:
ICMP: 0ms delay.
NTP: -0.0016435s offset from dc1.Mydomain.com
RefID: dc1.Mydomain.com [10.1.10.20]

DC1
========
C:\Program Files\Support Tools>net time /querysntp
The current SNTP value is: time-a.timefreq.bldrdoc.gov utcnist.colorado.edu
time.nist.gov nist1-dc.WiTime.net

DC2
======
C:\>net time /querysntp
The current SNTP value is: time.windows.com,0x1
I have changed it to DC1 now



"Ace Fekay [Microsoft Certified Trainer]" wrote:

"Kashif" <Kashif@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E6F70601-A6E7-4EF9-B872-069F4555ECF4@xxxxxxxxxxxxxxxx
I'm getting all these errors, I have just joined my machine on the Domain.
This is HP Compaq DESKTOP DC5100 MT
Please can anyone guide me?

Thanks

C:\Documents and Settings\kashif>net time
Current time at \\DC1 is 6/22/2009 6:03 PM

The command completed successfully.


C:\Documents and Settings\kashif>w32tm /monitor
GetDcList failed with error code: 0x80070057.
Exiting with error 0x80070057

C:\Documents and Settings\kashif>net time /querysntp
The current SNTP value is: dc1.Mydomain.com

The command completed successfully.

SYSTEM LOG
-----------------
EVENT ID 10004
DCOM got error "Logon failure: unknown user name or bad password. " and
was
unable to logon .\IWAM_TAG-264 in order to run the server:
{3D14228D-FBE1-11D0-995D-00C04FD919C1}

EVENT ID 36
The server failed to load application '/LM/W3SVC/1/ROOT'. The error was
'The server process could not be started because the configured identity
is
incorrect. Check the username and password.


Time Provider NtpClient: The response received from domain controller
dc1.MyDomain.com is missing the signature. The response may have been
tampered with and will be ignored.

Application LOG
---------------------
Windows cannot determine the user or computer name. (The specified domain
either does not exist or could not be contacted. ). Group Policy
processing
aborted.



Hello Kashif,

Please post an unedited ipconfig /all of the workstation and of a sample
domain controller.

Are any of the DCs multihomed?

--
Ace

This posting is provided "AS-IS" with no warranties or guarantees and
confers no rights.

Please reply back to the newsgroup/forum to benefit from collaboration among
responding engineers, as well as to help others benefit from your
resolution.

Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSA Messaging, MCT
Microsoft Certified Trainer
aceman@xxxxxxxxxxxxxxxxxxxxxxx
http://twitter.com/acefekay

For urgent issues, you may want to contact Microsoft PSS directly. Please
check http://support.microsoft.com for regional support phone numbers.


.

Relevant Pages

  • SBS SP1 Install Fails
    ... Component Name: Microsoft Exchange Forest Preparation ... Component Name: Server Configuration ... Windows Small Business Server 2003 ...
    (microsoft.public.windows.server.sbs)
  • Re: DC/DNS/DFS/AD Problem???
    ... Windows IP Configuration ... Here is the ipconfig for another server in the network. ...
    (microsoft.public.windows.server.networking)
  • Re: Blank screen after logging into RWW
    ... Microsoft Windows Small Business Server 2003 Best Practices Analyzer ... Connection-specific DNS Suffix. ...
    (microsoft.public.windows.server.sbs)
  • Re: GC does not know group membership of users
    ... Exchange Server Propeties: ... autodiscover and lists the DC of de.mycompany.com only, ... Windows IP Configuration ... Connection-specific DNS Suffix. ...
    (microsoft.public.win2000.active_directory)
  • Re: DNS Correct?
    ... Maybe your server nic is working to hard? ... How can I monitor network traffic thoughout the day, ... Windows IP Configuration ... Connection-specific DNS Suffix. ...
    (microsoft.public.backoffice.smallbiz)