Re: Can't Get DC List W32tm /monitor
- From: Kashif <Kashif@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 23 Jun 2009 08:41:02 -0700
This morning, when I turned on my computer , I found the following errors:
Application LOG:
================
9:03:29 AM
Performance counters for the WmiApRpl (WmiApRpl) service were loaded
successfully. The Record Data contains the new index values assigned to this
service.
9:03:29 AM
Performance counters for the WmiApRpl (WmiApRpl) service were removed
successfully. The Record Data contains the new values of the system Last
Counter and Last Help registry entries.
9:00:12 AM
Windows cannot obtain the domain controller name for your computer network.
(The specified domain either does not exist or could not be contacted. ).
Group Policy processing aborted.
8:59:57 AM
Windows cannot obtain the domain controller name for your computer network.
(The specified domain either does not exist or could not be contacted. ).
Group Policy processing aborted.
8:59:26 AM
The Security Center service has been stopped. It was prevented from running
by a software group policy.
SYSTEM LOG:
===========
11:08:38 AM
The server failed to load application '/LM/W3SVC/1/ROOT'. The error was
'The server process could not be started because the configured identity is
incorrect. Check the username and password.
11:08:38 AM
DCOM got error "Logon failure: unknown user name or bad password. " and was
unable to logon .\IWAM_TAG-264 in order to run the server:
{3D14228D-FBE1-11D0-995D-00C04FD919C1}
10:52:28 AM
The server failed to load application '/LM/W3SVC/1/ROOT'. The error was
'The server process could not be started because the configured identity is
incorrect. Check the username and password.
10:52:28 AM
DCOM got error "Logon failure: unknown user name or bad password. " and was
unable to logon .\IWAM_TAG-264 in order to run the server:
{3D14228D-FBE1-11D0-995D-00C04FD919C1}
10:45:08 AM
The time provider NtpClient is configured to acquire time from one or more
time sources, however none of the sources are currently accessible. No
attempt to contact a source will be made for 119 minutes. NtpClient has no
source of accurate time.
10:45:08 AM
Time Provider NtpClient: An error occurred during DNS lookup of the manually
configured peer 'dc1.Mydomain.com'. NtpClient will try the DNS lookup again
in 120 minutes. The error was: A socket operation was attempted to an
unreachable host. (0x80072751)
10:44:18 AM
The server failed to load application '/LM/W3SVC/1/ROOT'. The error was
'The server process could not be started because the configured identity is
incorrect. Check the username and password.
10:44:18 AM
DCOM got error "Logon failure: unknown user name or bad password. " and was
unable to logon .\IWAM_TAG-264 in order to run the server:
{3D14228D-FBE1-11D0-995D-00C04FD919C1}
10:40:08 AM
The Security System could not establish a secured connection with the server
cifs/DC2. No authentication protocol was available.
10:40:05 AM
The Security System detected an attempted downgrade attack for server
cifs/DC2. The failure code from authentication protocol Kerberos was "There
are currently no logon servers available to service the logon request.
(0xc000005e)".
10:39:49 AM
The Security System could not establish a secured connection with the server
cifs/DC2. No authentication protocol was available.
10:39:49 AM
The Security System detected an attempted downgrade attack for server
cifs/DC2. The failure code from authentication protocol Kerberos was "There
are currently no logon servers available to service the logon request.
(0xc000005e)".
10:35:04 AM
Restart Required: To complete the installation of the following updates, the
computer must be restarted. Until this computer has been restarted, Windows
cannot search for or download new updates:
- Security Update for Windows XP (KB970483)
10:35:04 AM
Installation Successful: Windows successfully installed the following
update: Security Update for Windows XP (KB970483)
10:34:59 AM
Windows XP Hotfix KB970483 was installed.
9:45:19 AM
The time provider NtpClient is configured to acquire time from one or more
time sources, however none of the sources are currently accessible. No
attempt to contact a source will be made for 59 minutes. NtpClient has no
source of accurate time.
9:45:19 AM
Time Provider NtpClient: An error occurred during DNS lookup of the manually
configured peer 'dc1.Mydomain.com'. NtpClient will try the DNS lookup again
in 60 minutes. The error was: A socket operation was attempted to an
unreachable host. (0x80072751)
9:14:52 AM
The time provider NtpClient is configured to acquire time from one or more
time sources, however none of the sources are currently accessible. No
attempt to contact a source will be made for 29 minutes. NtpClient has no
source of accurate time.
9:14:52 AM
Time Provider NtpClient: An error occurred during DNS lookup of the manually
configured peer 'dc1.Mydomain.com'. NtpClient will try the DNS lookup again
in 30 minutes. The error was: No such service is known. The service cannot be
found in the specified name space. (0x8007277C)
9:02:00 AM
Installation Ready: The following updates are downloaded and ready for
installation. To install the updates, an administrator should log on to this
computer and Windows will prompt with further instructions:
- Security Update for Windows XP (KB970483)
9:00:48 AM
The Application Layer Gateway Service service was successfully sent a start
control.
9:00:48 AM
The Remote Access Connection Manager service was successfully sent a start
control.
9:00:48 AM
The Terminal Services service entered the running state.
9:00:48 AM
The Terminal Services service was successfully sent a start control.
9:00:48 AM
The Network Location Awareness (NLA) service entered the running state.
9:00:48 AM
The Network Location Awareness (NLA) service was successfully sent a start
control.
9:00:06
The time provider NtpClient is configured to acquire time from one or more
time sources, however none of the sources are currently
accessible. No attempt to contact a source will be made for 14 minutes.
NtpClient has no source of accurate time.
9:00:06
Time Provider NtpClient: An error occurred during DNS lookup of the manually
configured peer 'dc1.Mydomain.com'. NtpClient will try the DNS lookup again
in 15 minutes. The error was: A socket operation was attempted to an
unreachable host. (0x80072751)
8:59:51 AM
The Security System could not establish a secured connection with the server
cifs/DC1. No authentication protocol was available.
8:59:51 AM
The Security System detected an attempted downgrade attack for server
cifs/DC1. The failure code from authentication protocol Kerberos was "There
are currently no logon servers available to service the logon request.
(0xc000005e)".
8:59:47 AM
The time provider NtpClient is configured to acquire time from one or more
time sources, however none of the sources are currently accessible. No
attempt to contact a source will be made for 14 minutes. NtpClient has no
source of accurate time.
8:59:47 AM
Time Provider NtpClient: An error occurred during DNS lookup of the manually
configured peer 'dc1.Mydomain.com'. NtpClient will try the DNS lookup again
in 15 minutes. The error was: A socket operation was attempted to an
unreachable host. (0x80072751)
8:59:37 AM
No Domain Controller is available for domain MyDomain due to the following:
There are currently no logon servers available to service the logon request.
..
Make sure that the computer is connected to the network and try again. If
the problem persists, please contact your domain administrator.
8:58:55 AM
Broadcom NetXtreme Gigabit Ethernet: Network controller configured for 100Mb
full-duplex link
8:58:55 AM
Broadcom NetXtreme Gigabit Ethernet: Driver initialized successfully.
8:59:08 AM
The Event log service was started.
8:59:08 AM
Microsoft (R) Windows (R) 5.01. 2600 Service Pack 3 Multiprocessor Free.
"Ace Fekay [Microsoft Certified Trainer]" wrote:
"Kashif" <Kashif@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message.
news:E6F70601-A6E7-4EF9-B872-069F4555ECF4@xxxxxxxxxxxxxxxx
I'm getting all these errors, I have just joined my machine on the Domain.
This is HP Compaq DESKTOP DC5100 MT
Please can anyone guide me?
Thanks
C:\Documents and Settings\kashif>net time
Current time at \\DC1 is 6/22/2009 6:03 PM
The command completed successfully.
C:\Documents and Settings\kashif>w32tm /monitor
GetDcList failed with error code: 0x80070057.
Exiting with error 0x80070057
C:\Documents and Settings\kashif>net time /querysntp
The current SNTP value is: dc1.Mydomain.com
The command completed successfully.
SYSTEM LOG
-----------------
EVENT ID 10004
DCOM got error "Logon failure: unknown user name or bad password. " and
was
unable to logon .\IWAM_TAG-264 in order to run the server:
{3D14228D-FBE1-11D0-995D-00C04FD919C1}
EVENT ID 36
The server failed to load application '/LM/W3SVC/1/ROOT'. The error was
'The server process could not be started because the configured identity
is
incorrect. Check the username and password.
Time Provider NtpClient: The response received from domain controller
dc1.MyDomain.com is missing the signature. The response may have been
tampered with and will be ignored.
Application LOG
---------------------
Windows cannot determine the user or computer name. (The specified domain
either does not exist or could not be contacted. ). Group Policy
processing
aborted.
Hello Kashif,
Please post an unedited ipconfig /all of the workstation and of a sample
domain controller.
Are any of the DCs multihomed?
--
Ace
This posting is provided "AS-IS" with no warranties or guarantees and
confers no rights.
Please reply back to the newsgroup/forum to benefit from collaboration among
responding engineers, as well as to help others benefit from your
resolution.
Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSA Messaging, MCT
Microsoft Certified Trainer
aceman@xxxxxxxxxxxxxxxxxxxxxxx
http://twitter.com/acefekay
For urgent issues, you may want to contact Microsoft PSS directly. Please
check http://support.microsoft.com for regional support phone numbers.
- References:
- Can't Get DC List W32tm /monitor
- From: Kashif
- Re: Can't Get DC List W32tm /monitor
- From: Ace Fekay [Microsoft Certified Trainer]
- Can't Get DC List W32tm /monitor
- Prev by Date: Re: move Enterprise root CA from one to the other DC
- Next by Date: Re: Can't Get DC List W32tm /monitor
- Previous by thread: Re: Can't Get DC List W32tm /monitor
- Next by thread: Re: Can't Get DC List W32tm /monitor
- Index(es):
Relevant Pages
|
Loading
