Re: Windows 2003 Help

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Update

I stopped the following services on the new server

DNS WINS FIREWALL

On Old server stopped the FIREWALL

Now on the new server I can issue netdom query fsmo

I get good results what I would expect.

So I am now thinking it is a DNs issue on the new server DNS setup.

reason I think this is because I started getting event 1053 on all my
workstations now.

I will turn on the firewall on the old server first to see if I can still
issue the netdom command

If that is the problem then I need to know what ports I might be missing.

I will let you know how it goes from hear.

Also I got a 1704 scecli event which I have not seen on the new server in a
while this tells me AD is working also


Thanks

Tom
"Meinolf Weber [MVP-DS]" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb661bdc78cb6cca970a23cb@xxxxxxxxxxxxxxxxxxxxxxx
Hello Thomas,

You get the errors on the old DC when running the commands dcdiag and
netdiag?

What's with repadmin /showrepl command output?

Some reg changes requires a reboot, normally mentioned in the article.

So is there a firewall between the DCs', you didn't answer this?

You can post the outputs here. You use private ip ranges, hopefully,
10.x.x.x, 172.x.x.x or 192.168.x.x? For your domain/server names you can
change them.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

Meinolf

I am logging in as domain administrator

i reveiewed KB555381 made firewall changes
Also modified the registry on both servers.
I ran dcdiag and netdiag on my first dc

Still getting There are no more endpoints available from the endpoint
mapper.

Do you think I should restart the server after the changes to the
registry?

Can I send you a copy of the dcdiag and netdiag?

Thanks

Tom

"Meinolf Weber [MVP-DS]" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb661bda38cb6cbbd6a42cbb@xxxxxxxxxxxxxxxxxxxxxxx

Hello Thomas,

What account are you using for the command?

If you have 2 DC's make sure they replicate correct, use repadmin
/showrepl or replmon form the run line(GUI version). On the DC's run
dcdiag /v and netdiag /v to check for errors.

You talk about firewall, are they used between the DC's? Check this
one
for needed open ports:
http://support.microsoft.com/kb/555381
Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
Just added second Domain controller on my network
I have 2 Windows 2003 R2 Standard DC server Sp2
Both run DNS
I am getting this message on the new DC when I issue this command
netdom query fsmo
There are no more endpoints available from the endpoint mapper.
Just went thru all firewall settings and not sure why this is not
working
Any ideas or suggestions

Thanks

Tom






.

Relevant Pages

  • Re: loss of SOME connectivity
    ... I "think" it is DNS. ... Yes, I can ping the router, AND the ISP DNS. ... I cannot connect the inet cable directly to the server because the inet is ... MS firewall not started. ...
    (microsoft.public.windows.server.sbs)
  • Re: E-Mail Address Cant Receive E-Mail from *Some* External Organizations
    ... The fact that _some_ messages are delivered is because they are sent from different IPs, so double-check your firewall settings. ... So, that looks right to me, anyway; both resolve to the proper IP address of the external interface for our firewall, and the only difference is that for "company.org" our ISP's mail server acts as a backup server in case our internal mail server is down. ... However, if I send a message to "me@xxxxxxxxxxxxxxxx" from my Yahoo e-mail account, I get an NDR returned to my Yahoo account. ... I have checked with our ISP who handles our DNS settings, and they indicate that all appears to be in order with our DNS and MX records. ...
    (microsoft.public.exchange.admin)
  • RE: Firewall Rule Set not allowing access to DNS servers?
    ... I changed the DNS rules as you suggested, and the firewall works perfectly - ... > # Allow out access to my ISP's Domain name server. ... > so your udp packets never match this rule and default to ...
    (freebsd-questions)
  • Re: Undeliverable Mail
    ... Well adding an spf record is out of the question. ... Yes, our large, cluster-based DNS system is compliant with RFC 1035. ... while EHLO is an Enhanced command. ... > on the properties of the Default SMTP Virtual server. ...
    (microsoft.public.exchange.admin)
  • Re: Page Cannot Be Displayed
    ... DNS is there and correct and my pinging the server works perfectly. ... Step1: Then Try this Start The RUN Command and type in the following: ...
    (microsoft.public.windows.inetexplorer.ie6.browser)