Re: Cant access web on local network server

Hello Thomas,

For correct DNS resolution you have also open port 69. What's the reason to block domain internal all the ports? Basically with a firewall to the external world you should be fine.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


Meinolf

Thanks

Maybe you can help me now that I turned on the firewall again , my pcs
now can access the local web site but can not get out to the external
webs

What setting am i missing now?

When I go into the firewall settings

advanced>> Local area connection>settings>services
advanced>>
internet mail server (SMTP)
Secure Web (HTTPS)
Web Server (HTTP)
only these three are checked

ICMP
allow incoming echo request is only one checked
Any ideas

Thanks

Tom

"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb66f98f8cb2364383fbd9b@xxxxxxxxxxxxxxxxxxxxxxx

Hello Thomas,

Basically the port 80 is for http, sometimes 8080, https uses port
443. And again please stick to one posting. You will get answers, it
will not be faster if you post the same question multiple times.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
I just turned on the windows built in firewall on my Windows 2003 R2
Standard server and now my pcs can not access the web
site(Sharepoint2.0) that is running on the server. This is from my
local area network. If I turn off the firewall on the Windows 2003
server then the pc's works.

What settings am I missing I looked all over but do not see what to
open up for the local lan

Any ideas

Thanks

Tom



.

Relevant Pages

  • Re: How to Maintain an IIS Server?
    ... > server running on a Windows 2000 server. ... before a firewall and antivirus have been installed]. ... open ports; however, this will not identify which program is using the port. ...
    (microsoft.public.inetserver.iis.security)
  • Re: CEICW fails at firewall config
    ... ISA Server prevents connection to a remote desktop when you connect through ... Remote Web Workplace on a Windows Small Business Server 2003-based computer ... Acceleration Server as a firewall. ... connection uses TCP port 4125. ...
    (microsoft.public.windows.server.sbs)
  • Re: How to Maintain an IIS Server?
    ... >> server running on a Windows 2000 server. ... > before a firewall and antivirus have been installed]. ... > program or executable using that port. ...
    (microsoft.public.inetserver.iis.security)
  • Re: RWW with no https
    ... Speaking about MS IIS as a web server, in HTTP, one can run multiple ... "host headers" and run all sites on the default port 80. ... to workstations, runs on port 4125, which is dynamically opened by the SBS ... HTTP why cant you do the same with HTTPS? ...
    (microsoft.public.windows.server.sbs)
  • Re: Activesync / Airsync - Alternative Ports
    ... Setup a reverse HTTP proxy. ... Another idea is to use the PPTP capabilities of a Windows Server to allow ... Satellite - Cisco Firewall - Exchange Server ... So on the server side you would configure the port 80 to redirect to ...
    (microsoft.public.pocketpc.activesync)
Loading