Re: Hyperterminal
- From: Meinolf Weber <meiweb(nospam)@gmx.de>
- Date: Fri, 25 Jul 2008 00:41:42 +0000 (UTC)
Hello Lee,
You're welcome.
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
Thanks Meinolf that is very helpful advice. Much appreciated
Lee Jefferies
On Thu, 24 Jul 2008 19:30:35 +0000 (UTC), Meinolf Weber
<meiweb(nospam)@gmx.de> wrote:
Hello Lee,
As you said, since Vista and server 2008 not. Copy the old
hypertrm.dll and hypertrm.exe from 2003 to the 2008 server to
whatever location and start the hypertrm.exe . Specify the location
settings and at the end you can choose like before the old COM port
connection settings. If hyperterminal is not installed you can
install it on the 2003 and copy the 2 files after installing or you
can expand them from them installation disk, you find them under i386
as hypertrm.dl_ and hypertrm.ex_
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
Hyperterminal was removed from Vista and thus I assume from Server
2008. I have a firewall that needs to be setup using a null modem
serial interface. I know there is a Hyperterminal download on the
internet that will probably do the job. Is there any included
software in Server 2008 that will interface to the server port and
let me set up the firewall?
.
- References:
- Re: Hyperterminal
- From: Lee Jefferies
- Re: Hyperterminal
- Prev by Date: Re: Mounting VHD Files
- Next by Date: Re: There is not enough disk space when installing SP2
- Previous by thread: Re: Hyperterminal
- Next by thread: Ipsec and triple des
- Index(es):
Relevant Pages
|
