Re: RIS - F12 Error



Hi Jon

Thanks for your quick reply, the RIS service has worked in the past so it
shouldn't be an issue with BOOTP, i have tried other machines and the same
happens, i dont get as far as any blue menu page, i tried to download and
install the menu editor as in your link but its based on a windows 2000
platform and were using 2003 SP1.

so its still not working.

"Jon Knight" wrote:

Has this RIS server ever worked in the past? are you sure BOOTP is forwarded
through your switches? can you try a different test machine. Do you get the
blue menu page? uninstall RIS and add it again, or check maually for the
presence of the menu file on the ris server

http://www.emboot.com/products_RISME.htm

try the menu editor above to confirm the RIS side is ok

"Assurew3b" <Assurew3b@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:8547B1E4-2A37-4050-9C32-384AB0CCEF72@xxxxxxxxxxxxxxxx
Hi, apologies if i am asking in the wrong area but couldnt find a specific
area dedicated to RIS (Remote Installation Service)

I have uploaded the XP sp2 cd filed to our ris server which allows me to
name and create a RIS image on our server.

I now have a new machine and when it boots I select F12 to choose a boot
option I then select 'Onboard Network Controller' after a few seconds it
asks
you to press F12 for 'Network Service Boot' it is at this point the
screens
goes blank and the only way to reslove it is to reboot, I cannot get to
the
screen to select the image i had previously built.

Got a really busy period comming up in terms of machine builds and could
do
with this being resolved if anyone has any idea's it would be much
appreciated.

Thanks

Matt





.



Relevant Pages

  • Re: RIS, same GUID, duplicates, Dell GX60s
    ... > their NIC without the requirement of the MS RIS boot disk. ... Hence the requirement of the RIS boot disk. ... >>> these nics part of the motherboard or pci devices? ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: Windows XP Embedded
    ... XPe image to a local hard drive. ... RIS, so it is easier for our production environment. ... Here is what I was referring to for using RIS to boot a XPe ISO boot ... I was thinking we had to install the .iso file onto the RIS server, ...
    (microsoft.public.windowsxp.embedded)
  • Re: RIS, same GUID, duplicates, Dell GX60s
    ... My first thought is the boot agent on the nic needs to be updated. ... these nics part of the motherboard or pci devices? ... It has to be run from a server and a floppy is created ... the nic drivers are not entirely correct, update the drivers in your RIS ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: PXE boot and transfer image from an XP Pro PC
    ... First, with RIS, you must use "risetup" to read from a XP PRO CD; ... the option to boot from the XP PRO subdirectory as a drive. ... We are using a TFTP server but don't know what file we need to boot ...
    (microsoft.public.windowsxp.embedded)
  • Re: RIS Problem
    ... the DHCP srv will show a record of the address & computer name ... did you see what the RIS error log has? ... The RIS server is in the same subnet as the ... > When trying to boot from the PXE boot floppy or by pushing ...
    (microsoft.public.win2000.setup_deployment)