Re: can ping but not see websites from clients

Tech-Archive recommends: Speed Up your PC by fixing your registry

Hello Leon,

Default Gateway is your router 192.168.0.254 and the real server address 192.168.0.203


Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

Sorry but what is the DG address and also what is the real server
address (192.168.0.203?)

"Meinolf Weber" wrote:

Hello Leon,

Remove the DG address from the DNS first and then use the real server
address instead of the loopback address.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
Hi,
I have Windows server 2003 with about 40 clients attached. I did
have
Webmarshal 3.5 and a firebox connected but this was causing loads of
problems
so I have unintalled Webmarshal and taken the firebox from the
system.
I have
given the router DHCP ability and taken it from the server.
I am now able to access the internet from the server without any
problems but all of the clients just get 'this page can not be
displayed' message. I am able to ping the site from the clients
computer though.
We have a static IP address

The router is 192.168.0.254
The server is 192.168.0.203
the ipconfig /all on the server is.
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\Administrator.ourdomain-local>ipconfig
/all
Windows IP Configuration

Host Name . . . . . . . . . . . . : ourdomain-pdc
Primary Dns Suffix . . . . . . . : owrdomain.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ourdomain.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC7760 Gigabit Server
Adapter
Physical Address. . . . . . . . . : 00-11-85-69-F9-C2
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.203
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.254
DNS Servers . . . . . . . . . . . : 192.168.0.254
127.0.0.1
Primary WINS Server . . . . . . . : 192.168.0.203
the differnce on the clients is.
The default gateway, dhcp and dns servers are all 192.168.0.254
Under the DNS properties on the server the 'forwarders' is
192.168.0.254 . I have also tried using the static IP address from
the
ISP too.
For some totally unknown reason there is one pc in the whole
building that is connected to the domain and it can connect but I
don't want to confuse matters with that one.

Please help me as I have spent hours trying to get this sorted and
am not getting anywhere but I am sure it is a minor change needed.

Thanks in advance



.

Relevant Pages

  • Re: static routing
    ... Connections work going out from inside the router, ... I'll have to remove the router and connect the server directly to the cable ... A static route has been added that matches the subnet ...
    (microsoft.public.windows.server.networking)
  • Re: Connection from remote computer to network SQL Server
    ... There is no firewall on the W2K machine acting as the SQL server. ... I tried making the SQL machine a "trusted" on the router. ... connection works. ... To find the IP address of your computer inside the network, ...
    (microsoft.public.access.adp.sqlserver)
  • Re: Networking Question - VLANs on SBS 2003 Premium SP1
    ... port on the old router so I now have a segregated WLAN. ... be sure you do not enable any DHCP server in internal network. ... On the Connection Type page, click Broadband, and then click Next. ... On the Network Connection, You must enable and configure the network ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... seleting full time broadband connection. ... Les Connor [SBS Community Member - SBS MVP] ... check the router as well and unless I missed a firewall setting on it, ... Anyway the Server Ipconfig /all is this... ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... As for error messages when I fail to access RWW with the laptop, ... the server) when you fail to access RWW with the laptop? ... I tried accessing RWW from my laptop connected to a router ... match the broadband connection, the two NIC firewall, the remote ...
    (microsoft.public.windows.server.sbs)