Re: Strange Problem with Authentication Has anyone ever run across

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance



Removed the computer from the domain (my computers, properties, Joined to
workgroup, restarted, Removed computer record in AD, loged in as admin
rejoined to domain restarted) Verified record creation in AD.

Still having Same problem...... argggggggg.
Thank you VERY VERY VERY Much for your Help Anthony.

I am still stumped...

"Anthony" wrote:

It sounds like the kind of problem you get if you access a domain from a
workgroup, or from another domain, or with a different account - for example
if you logged on to the client with a local account and then accessed a
domain resource. It is not the permissions, because you would be denied, not
prompted. You might try rejoining the client to the domain,
Anthony, http://www.airdesk.com

"David Lausten" <DavidLausten@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:6808247F-28E3-4BD0-B511-B0D1CA2EF0AC@xxxxxxxxxxxxxxxx
Thank you again Anthony :)

the 4th DC is in the Outreach office it is on the 10.1.1.0 subnet and
connected via VPN over a Cablemodem. only 1 server there and 2 users.

the route for 192 is to connect to another firewall interface for a report
feature. it is not one of the DC and is only used to connect to a RSView
system

The Netbios name of Site2 is indeed an upgrade from nt about 6 years ago.
Went from NT4 to 2000 and now on 03 Never have been able to figure out how
to
get rid of that :)

Yes do have a problem with all accounts funny thing is its not consistent.
In the past month I have had 6 different users complain about the problem.
not sure what is going on. when it runs the login net use s:
\\pbcdf-main\share it promps for username and password even though I am an
administrator on the domain.


ipconfig

Windows IP Configuration



Host Name . . . . . . . . . . . . : Lausten

Primary Dns Suffix . . . . . . . : Pbcdf.Com

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

DNS Suffix Search List. . . . . . : Pbcdf.Com

Pbcdf.com



Ethernet adapter ISCSI-2:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Server
Adapter

Physical Address. . . . . . . . . : 00-07-E9-1F-C5-A9

Dhcp Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.48.20

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . :



Ethernet adapter Internal:



Connection-specific DNS Suffix . : Pbcdf.com

Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit
Controller

Physical Address. . . . . . . . . : 00-19-B9-3F-B2-A9

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 10.25.240.133

Subnet Mask . . . . . . . . . . . : 255.255.248.0

Default Gateway . . . . . . . . . : 10.25.240.1

DHCP Server . . . . . . . . . . . : 10.25.240.14

DNS Servers . . . . . . . . . . . : 10.25.240.15

10.25.240.6

Primary WINS Server . . . . . . . : 10.25.240.15

Lease Obtained. . . . . . . . . . : Thursday, January 03, 2008
4:07:37 PM

Lease Expires . . . . . . . . . . : Saturday, January 05, 2008
4:07:37 PM



No General client problems. They are Clean machines.. I make a master
install all software. Run Sysprep. Make an image using Altiris. and push
to
the machine and rejoin to the domain.

Basicly pretty much this is the total issue.

1. I can log into the domain
2. Some Drives Map the one on the Main DC does not but promps for username
and password

As an Example. i type in \\pbcdf-main\netlogon (DC 1) it promps for
username
and password

I type in \\pbcdf-exs01\netlogon (DC 2) it opens up
I type in \\pbcdf-nts032\netlogon (DC 3) It Promps for Username and
Password
I type in \\pbcdf-oro\netlogon (DC 4) It opens up

Being that I am an Administrator on the Domain it should open up
everything.

Like in the share folder on pbcdf-main

on the Share permissions Administrators Full Control, Read and Change.
Everyone Read and Change

if I look at the security on the folder itself.
Administrators all rights. and Everyone is everything except for full
control.

double checking my membership and I am in administrators and my account is
not locked.

I go into effective permissions and type in my username.

I have the following
Full Control
Travers Folder
List Folder
Read Attributs
Read Extended Attr
Creat Files
Creat Folders
Write Attrib
Write Extended Attrib
Delete Sub
Delete

etc.

So there should be absolutly no reason it is promptming me for username
and
password. it is almost as if it doesnt know who I am

here is the key factor

when I do do the \\pbcdf-main\netlogon and it promps me for my username
and
password and I input my username and password. it comes up. but when I
reboot
it happens again. have no idea. Thanks again for the help

"Anthony" wrote:

David,
You have four DC's. What happened to the other one?
You have another subnet 10.1.1.0. Is that on a separate site? How is it
connected?
You have a route to a 192.168.12.0 subnet. Is one of the DC's multihomed?
Your Netbios domain name is SITE2. Is this an upgrade from Windows NT? Do
you have a problem with new accounts as well as with old accounts?
You are using the same domain name for AD as you are for your web
service.
Can you show an ipconfig /all from one of the clients where you are
having a
problem?
I don't quite follow your description of the problem, though I get the
general idea. Is this a problem from one or two specific clients? Do you
have any general client problems? Do you have any errors in the client
event
logs? Is this only a problem when mapping drives, and only from your own
client?
Anthony, http://www.airdesk.com



"David Lausten" <DavidLausten@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:DD12FC89-A114-4D5E-8D1E-35A116EFAFA1@xxxxxxxxxxxxxxxx
When I use \\pbcdf-main\netlogon it requests login... when I use
\\pbcdf-main.pbcdf.com\netlogon it also requests login.

checked DNS and it seems to be functioning correctly.

All DC's are in the same site. Ran Replmon and no errors in replication
I
will post the NetDiag and DcDiags in the next post.

Thank you VERY Much Anthony for helping with this !!!! I am at my wits
end.

"Anthony" wrote:

Its hard to tell from what you have said. I would run a replmon and
force
a
replication to check for errors. Then double check the DNS. Is
everything
resolving correctly when you use the FQDN? Are the DC's all on the
same
site?
Anthony, http://www.airdesk.com

"David Lausten" <DavidLausten@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
news:4AFA0548-4C3C-4744-8B01-213E6A601591@xxxxxxxxxxxxxxxx
Diag's too big :) I can email them by request. Thank you VERY Much
in
Advance.









.



Relevant Pages

  • Re: Strange Problem with Authentication Has anyone ever run across
    ... No General client problems. ... Some Drives Map the one on the Main DC does not but promps for username ... on the Share permissions Administrators Full Control, ... Anthony, http://www.airdesk.com ...
    (microsoft.public.windows.server.general)
  • Re: Strange Problem with Authentication Has anyone ever run across
    ... workgroup, or from another domain, or with a different account - for example ... You might try rejoining the client to the domain, ... Anthony, http://www.airdesk.com ... Some Drives Map the one on the Main DC does not but promps for username ...
    (microsoft.public.windows.server.general)
  • Re: Client can no longer log in to SBS
    ... If you do not know the local admin account, ... that client, so unless some maverick user or program changed the ... password, the username and password should work, I ... username and password results in the following error message: ...
    (microsoft.public.windows.server.sbs)
  • client installed but cannot connect using remote tools
    ... "the currently logged-in user does not have rights to access the client ... You must provide the username, domain and password of an account ... I reinstalled the client with a domain admin account, ...
    (microsoft.public.sms.setup)
  • Exchange password duplication
    ... without having to log in again when Outlook is executed. ... of the account. ... at all after re-entering the username a password. ... these accounts and re-adding them at the client side with no success. ...
    (microsoft.public.exchange.clients)