Re: Please help, major help needed, thanks, ras issues
- From: "Robert L. \(MS-MVP\)" <noreply@xxxxxxxxxxxxxxx>
- Date: Tue, 13 Nov 2007 11:45:30 -0600
We may have two different issues here.
1. After enabled RAS, the server may block ping and modify the router so that we can't ping and access the Internet.
2. In many cases, VPN error 800 is GRE issue. Make sure the router allows VPN pass through. Or these search results may help.
VPN error 721 and 800Case 1: When a user attempts to access the Windows VPN server that is behind a Linksys WRT54G, he receives VPN Error 800 or 721. ....
www.chicagotech.net/VPN/vpncase800.htm - Similar pages
error 721 and error 800
Q: Error 721 and error 800. I have SBS 2003 Standard Edition. ... I double checked the check list in server management and enabled VPN to the appropriate ...
www.chicagotech.net/Q&A/vpn25.htm
--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Dave Beanie" <dbeanie@xxxxxxxxxxx> wrote in message news:DA4406AA-AD92-4A5F-BC07-A42F27C9BFF9@xxxxxxxxxxxxxxxx
ok, long story but please read through
I have a windows 2003 server, installed RAS, setup RAS, and I cannot VPN
into it, I keep getting error 800.
I cannot ping the server when I have RAS running, once I turn it off I can
ping the server.
I do not have any firewalls running, no anti virus
here is what i have done:
opened several ports on router, 1723, 47-51, 3389, 500, still no
changed the static routes
went through manage servers and step by step on the help for setting up ras
I have done several other things but cant remember..
I have my laptop plugged into the router and the server is into it also, I
can vpn to its ip address and it doesnt give me error 800, but i cannot ping
it
I cannot get out to the internet on the server,
I used to be able to until just recently
I have a t-1 connection, and it comes in to the router and then plugs into
the server from there.
now I have another nic in the server for another network but that ip is at
172.x.x.x, the one i have for this connection i have an ip at 192.168.x.x.
please give me any suggestions
Thanks
.
- Prev by Date: Re: Win2K3 doesn't show the 'Sharing' tab in when I right-click on a targeted folder
- Next by Date: ODBC connection updates
- Previous by thread: Cannot edit "Log on as a service" and "Allow log on locally" policies on W2K3 server.
- Next by thread: ODBC connection updates
- Index(es):
Relevant Pages
|
