Re: SP1 install and win2k3 server 2003
- From: "James W. Long" <JamesLong@xxxxxxxxxx>
- Date: Mon, 12 Feb 2007 19:35:22 -0500
Dear All:
thats not the error I get.
I install sp1 then bang
nothing much works.
look:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4381
Date: 2/7/2007
Time: 6:43:43 AM
User: JEWELCONSULTING\administrator
Computer:
Description:
Windows Server 2003 Service Pack 1 was installed.
then I reboot.
eventlog comes up.
first info:
Event Type: Information
Event Source: DCOM
Event Category: None
Event ID: 10026
Date: 2/7/2007
Time: 7:12:46 AM
User: N/A
Computer:
Description:
The description for Event ID ( 10026 ) in Source ( DCOM ) cannot be found.
The local computer may not have the necessary registry information or
message DLL files to display messages from a remote computer. You may be
able to use the /AUXSOURCE= flag to retrieve this description; see Help and
Support for details. The following information is part of the event: 86400,
SuppressDuplicateDuration, Software\Microsoft\Ole\EventLog.
second info
Event Type: Information
Event Source: IPSec
Event Category: None
Event ID: 4295
Date: 2/7/2007
Time: 7:12:18 AM
User: N/A
Computer:
Description:
The IPSec Driver is starting in Bypass mode. No IPSec security is being
applied while this computer starts up. IPSec policies, if they have been
assigned, will be applied to this computer after the IPSec services start.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 01 00 54 00 ......T.
0008: 00 00 00 00 c7 10 00 40 ....Ç..@
0010: 01 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
first error:
Event Type: Error
Event Source: SAM
Event Category: None
Event ID: 12291
Date: 2/7/2007
Time: 7:12:55 AM
User: N/A
Computer:
Description:
SAM failed to start the TCP/IP or SPX/IPX listening thread
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 6b 07 00 00 k...
second error:
Event Type: Warning
Event Source: LsaSrv
Event Category: None
Event ID: 32777
Date: 2/7/2007
Time: 7:12:55 AM
User: N/A
Computer:
Description:
The LSA was unable to register its RPC interface over the TCP/IP interface.
Please make sure that the protocol is properly installed.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 6b 07 00 00 k...
third error:
Event Type: Error
Event Source: IPSec
Event Category: None
Event ID: 4292
Date: 2/7/2007
Time: 7:14:41 AM
User: N/A
Computer:
Description:
The IPSec driver has entered Block mode. IPSec will discard all inbound and
outbound TCP/IP network traffic that is not permitted by boot-time IPSec
Policy exemptions. User Action: To restore full unsecured TCP/IP
connectivity, disable the IPSec services, and then restart the computer.
For detailed troubleshooting information, review the events in the Security
event log.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 01 00 54 00 ......T.
0008: 00 00 00 00 c4 10 00 c0 ....Ä..À
0010: 01 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
after that, these sevices terminate because the endpoint mapper database
entry could not be mapped for them:
task scheduler, ipsec, automatic updates, com+(hung on start), system event
notification (dependency hung on start),
network connections(hung),windows firewall/ICS(hung), and the ntp
timeprovide cant get time because it cant
make a dns lookup of my time server, (becasue DNS is not up, and neither is
the DNS MANAGER)
So I reboot again.
then I disable ipsec from starting and reboot again but still I am not a dc,
even thoug I am the only dc.
(because rpc STILL does not come up)
I do not know how to ask the question. I dont think your fix is the
solution. what is the problerm here
and how do I fix it?
Thank you in advance
James Long
"Dragos CAMARA" <dragos_c@xxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:61764CDB-12C7-4218-B54B-293A36E84A99@xxxxxxxxxxxxxxxx
hi,correctly.
check this may be help you :
http://support.microsoft.com/kb/912023
--
Dragos CAMARA
MCSA Windows 2003 server
"James W. Long" wrote:
Hi all:
I run Windows Server 2003 SP1 INSTALL then it breaks.
errors:
-ipsec blocks me.
-no ethernet connectoid in control panel->network anymore,
but device manger says ethernet contoller present and is working
the connectoid was there before the install and was fine.
-the rpc server is unavailable. cannot fine the domain name,
group policy processing is aborted.
-DNS manager can't connect
then this guy tells me this:
hi,
if you install the sp1 that was for deploy with SUS you have to regsvr32
polstore.dll to start the ipsec in default mode not in blocked mode
--
me:
Did I "install the sp1 that was for deploy with SUS..."
I do not know....???
I got it off microsofts website the full sp1 install,
as opposed to getting the download from windows update.
"regsvr32 polstore.dll" when do I do that???
Will it solve the problem ?
Thank you,
James W. Long
.
- Follow-Ups:
- Re: SP1 install and win2k3 server 2003
- From: Dragos CAMARA
- Re: SP1 install and win2k3 server 2003
- References:
- SP1 install and win2k3 server 2003
- From: James W. Long
- RE: SP1 install and win2k3 server 2003
- From: Dragos CAMARA
- SP1 install and win2k3 server 2003
- Prev by Date: Re: Windows 2000 IP Range Question More options
- Next by Date: Re: Stopping a user logging on two machines at the same time?
- Previous by thread: RE: SP1 install and win2k3 server 2003
- Next by thread: Re: SP1 install and win2k3 server 2003
- Index(es):
Relevant Pages
|
