Re: HELP ! 2003 server "UNMOUNTABLE_BOOT_VOLUME " on boot

Worked flawlessly ! Thanks !!!!

If your in the area near Foxwoods casino (I live about 15 min away), I owe you a beer or 2 !

Thanks again !!


"Pegasus (MVP)" <I.can@xxxxxxx> wrote in message news:eLbQ3937GHA.4116@xxxxxxxxxxxxxxxxxxxxxxx
See below.

"Me" <someone@xxxxxxxxxxxxx> wrote in message
news:3138965D-DA33-4CBD-834D-595510CC243B@xxxxxxxxxxxxxxxx
Just a few question on this. The drive in the server is about 30gb now
(with
about 15gb used). I have a extra 20gb around. Will this cause a problem
with
the server ?
No, unless you run out of space.

Now is this drive bad ? Or do you think a with a format it could be used
for
temp storage ? (they really don't give me much $$ to work with)
Hard disks are extremely cheap! Get yourself an 80 GByte disk
for this - it will be faster and it will give you plenty of spare capacity!

xcopy.. What is the best command line to do the whole drive in one shot ?
xcopy *.* ? (don't remember the last time I used it, never really needed
to).
Try xcopy /? from a Command Prompt.

I want to get this done ASAP

Thank you for your help !!!!
You're welcome.



"Pegasus (MVP)" <I.can@xxxxxxx> wrote in message
news:%236oygp27GHA.3812@xxxxxxxxxxxxxxxxxxxxxxx
>
> If you can read the disk under Vista then it's a simple matter
> to create a bootable clone:
> 1. Take a disk of sufficient size.
> 2. Install it as a slave disk on some Win2000/XP/2003 machine.
> 3. Create the necessary partitions.
> 4. Mark the primary partition active.
> 5. Connect it as a slave disk to the Vista machine.
> 6. Use xcopy.exe to copy all files and folders from the problem
> disk to the new disk. Make sure to use the right switches to
> copy system files, hidden files and permissions.
>
> You can now boot your server with this clone disk, provided
> that it was not damaged during the power failure.
>
>




.

Relevant Pages

  • Re: Need to combine two computers hard drives
    ... I didn't try to mislead the person how ask the question. ... *** can handle a SLAVE disk too. ... install it into the faster one. ...
    (microsoft.public.windowsxp.general)
  • Re: XP does not recognise my second hard disk
    ... Not that the LS-120 is not a good idea, but that it uses the IDE connection. ... Perhaps a special Floppy Disk Drive controller to handle the LS-120 as a floppy ... On XP, however, my master HD is Drive 0, bit it is the LS120 which is identified as Drive 1, with no mention of my 40GB slave disk. ... installing XP?Thanks for any help or advice you can give me. ...
    (microsoft.public.windowsxp.newusers)
  • Re: Primary and Slave Disk
    ... only see the Master one in the bios. ... It has to be pointed out that the slave disk ...
    (microsoft.public.windowsxp.hardware)
  • Re: do i need to convert old fat32 file data to ntfs upgrading to
    ... Connect your old disk as a slave disk in your new system. ... You can convert your old disk to NTFS if you wish, ... > pata and poss one 200 gb sata drives. ...
    (microsoft.public.win2000.general)
  • Re: HELP ! 2003 server "UNMOUNTABLE_BOOT_VOLUME " on boot
    ... The drive in the server is about 30gb now. ... Install it as a slave disk on some Win2000/XP/2003 machine. ... Connect it as a slave disk to the Vista machine. ...
    (microsoft.public.windows.server.general)