Re: Unable to boot to existing 2003 server

Hi,

Thank you very much. I have done this:

1. Disconnected the new disk.
2. Made the old disk as Primary master.
3. Booted the server with a diskette. Basically followed
http://support.microsoft.com/kb/325879 steps.
4. I got an error
"Windows Server 2003 could not start because of a computer disk hardware
configuration problem. Could not read from selected boot disk. Check boot
path and disk hardware. Please check the Windows Server 2003 documentation
about hardware disk configuration and your hardware disk configuration and
your hardware reference manuals for additional information. Boot Failed."

5. When I try to access the data, I get an access denied error.
6. When I connect to another machine with 2003 server on it and use
dskprobe.exe, it shows the NTFS Boot Record View with all zeroes.

Any more pointers to fix the problem?


Thanks,
Mallik

"Pegasus (MVP)" wrote:

Try this:
- Disconnect the new disk.
- Make the old disk the primary master.
- Boot the machine with a server boot diskette.
- Use diskmgmt.msc to mark the boot partition 'active'.

Here is how to make a server boot diskette:
- Format a floppy disk on some Win2000/XP PC.
- Copy these files from the \i386 folder of your SBS CD to A:\
ntldr
ntdetect.com
- Create a file a:\boot.ini with these lines
[Boot Loader]
Timeout=3
Default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[Operating Systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft SBS" /fastdetect

About your inaccessible data: What happens when you try to
access it? If it is valuable, how come it did not get backed up?


"Mallik" <Mallik@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:58D145C3-9994-46D4-B857-65B5BE23299A@xxxxxxxxxxxxxxxx
Hi,

1. I had installed 2003 SBS on a HDD and it was working fine. I saved lot
of
valuable data on it. Some of this data is under Users Shared Folders.
2. To increase the space on the server, I added another HDD. The new HDD
was
connected as Primary Master and the old one was Secondary Master.
3. I formatted the newly added hdd as NTFS using the My
Computer->Manage->Computer Management->Disk Management feature.
4. While doing so, I made the HDD as Active.
5. When I rebooted the machine, it did not boot. I removed the new HDD and
tried to boot again but it did not.
6. Then I tried the Recover Console through the 2003 Installation CD. I
tried changing the boot.ini, fixmbr, fixboot but it does not boot.
7. When I connect this disk to another machine with 2003, I am able to see
that the data is there (except the valuable data under Users Shared
Folders).

How can I make the disk bootable again? If I can not boot it again, how
can
I recover the data under Users Shared Folders?

Thanks,
Mallik




.

Relevant Pages

  • Re: New HDD Installation
    ... while your installation is up and running use the Disk Management tool and make sure that you have a properly identified System Partition and that it is marked as "Active". ... If it is so identified and marked and still won't boot then do both commands as Ron suggested. ... Description of the Windows XP Recovery Console ... It would take awhile but I am willing to start fresh if it gets the new HDD in and the small out. ...
    (microsoft.public.windowsxp.general)
  • Re: New HDD Installation
    ... while your installation is up and running use the Disk Management ... I was able to boot the system with the XP cd but I believe that a boot ... Description of the Windows XP Recovery Console ... if it gets the new HDD in and the small out. ...
    (microsoft.public.windowsxp.general)
  • Re: New HDD Installation
    ... while your installation is up and running use the Disk Management tool and make sure that you have a properly identified System Partition and that it is marked as "Active". ... I was able to boot the system with the XP cd but I believe that a boot sector must be missing as per Ron's advice. ... Description of the Windows XP Recovery Console ... It would take awhile but I am willing to start fresh if it gets the new HDD in and the small out. ...
    (microsoft.public.windowsxp.general)
  • Re: rebuild 240v from scratch
    ... >>> disk bootable, I would boot from it and dd from one disk to the other. ... >> of METADEVICE databases on server b. ... >> find a metadb on server B to resolve it to a physical partition. ...
    (comp.unix.solaris)
  • XP Pro boot hanging
    ... Digital HDD, for Sager laptop; using Acronis True Image 11, boot disk. ... Neither drive will boot into Windows. ...
    (microsoft.public.windowsxp.general)