Re: Win 2003

Hi
Okay

IP address is fixed

ipconfig /all

IP 192.168.200.9
Net Mask 255.255.255.0
Default gateway 192.168.200.1 My firewall
DNS 192.168.200.5 DC

There is nothing blocking things on the firewall. All other macines have the
same config and work. Server is a member of the domain.

route print

IPv4 Route Table
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x10003 ...00 13 72 1c eb 6e ...... Broadcom NetXtreme Gigabit Ethernet
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.200.1 192.168.200.9 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.200.0 255.255.255.0 192.168.200.9 192.168.200.9 20
192.168.200.9 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.200.255 255.255.255.255 192.168.200.9 192.168.200.9 20
224.0.0.0 240.0.0.0 192.168.200.9 192.168.200.9 20
255.255.255.255 255.255.255.255 192.168.200.9 192.168.200.9 1
Default Gateway: 192.168.200.1
===========================================================================
Persistent Routes:
None

nslookup works and I get the correct external address.

William

"Don Wilwol" <donWilwol@(EMAIL)yahoo.com> wrote in message
news:%23IwXvKjkGHA.5020@xxxxxxxxxxxxxxxxxxxxxxx
If your IP config works inside and not externally, you either have a mis
configure subnet mask or default gateway, or a network devise (such as a
firewall) blocking you.

There is nothing that blocks external addresses on a Windows server by
default that I know of.

If this doesn't help, we will need some more information. What's your
network set up etc?

--
--------
Hope It Helps!

dw
_______________________________
Don Wilwol
Distributed Application Technologies.
dwilwol(DELETE)@datbusiness.com
www.AtTheDataCenter.com (personal website)
www.skysphere.com (hosting available)


"William Cooper" <nospamregcooper@xxxxxxxxxxx> wrote in message
news:u0TsqiikGHA.4660@xxxxxxxxxxxxxxxxxxxxxxx
Hi

I have just built a new Win 2003 server, TCP/IP works fine within the
network but I cannot get onto the internet or ping external addresses.
Destination host unreachable. I recall that there is some setting in the
server that locks this out by default but cannot remember or find it.
Help please.

William





.

Relevant Pages

  • Re: Dual NICs on Server 2003 issue
    ... as the primary and only DNS server as the 192.168.87.50 is the DNS server ... Do I have to add a route for that too? ... gateway you need to use static routing. ... connects via another gateway to a remote site that is on a 10.0.1.x ...
    (microsoft.public.windows.server.networking)
  • Re: Suggest firewall for Win98se+ICS(dialup)+NAV
    ... > gateway for a peer-to-peer LAN with two workstations behind it? ... > use some sort of software firewall, e.g., SPF, as a network gateway ... > server, mail server, news server, or FTP server running on the Win 98 SE ... handles inbound from the internet and outbound from the gateway box. ...
    (comp.security.firewalls)
  • Re: Routing a Dial-in Router ...
    ... > of ip addresses on the same subnet as the server. ... should end up with a host route and you just need to add the network route ... If the gateway has a suitable OS, ...
    (comp.os.linux.networking)
  • RE: [SLE] Two network cards (dual-homed), twogateways?Desparateforhelp
    ... patch-panel in the closet where the server is. ... default gateway is the 10 network's gateway, ... From this I would say that the default gateway on the server 192 network ... "route add default gw 192.168.0.1". ...
    (SuSE)
  • Re: Dual NICs on Server 2003 issue
    ... gives an RPC server unavailable error. ... Do I have to add a route for that too? ... gateway you need to use static routing. ... connects via another gateway to a remote site that is on a 10.0.1.x ...
    (microsoft.public.windows.server.networking)