New Hard Drive Won't Boot

Hi,
I was really proud of myself earlier today when I (first time ever!)
managed to remove an old hard drive and plug in a new one. Everything
looked fine until I closed up the thing, plugged everything back in, and
tried to turn it on. It goes directly to setup. The boot sequence does not
show a hard drive, just CD and floppy. I sure hope that this is some dumb
thing I forgot to do! Any suggestions? THANKS!!!


.

Relevant Pages

  • Re: /dev/fd0 is not a valid block device
    ... and it was really pretty dumb. ... So I opened up the case, and saw that I'd forgotten to plug ... It saw the floppy _controller_, ... I think James meant a floppy disk, ...
    (Fedora)
  • New Hard Drive Wont Boot
    ... I was really proud of myself earlier today when I (first time ever!) ... managed to remove an old hard drive and plug in a new one. ... show a hard drive, just CD and floppy. ... I sure hope that this is some dumb ...
    (microsoft.public.windowsxp.general)
  • Re: How to tell DP35DP BIOS version before buying CPU?
    ... The first time was a long time ago. ... I gently made sure the plug slots were turned clockwise as ... and was curious if the DP35DP will boot with 4 GB for the first ... If it won't, I'll only install a ...
    (comp.sys.intel)
  • Re: Major Newb Question
    ... > First time on Linux Red hat 9.0 Created a few files in the editor but for ... I suggest you look into "mtools" which provide DOS-like ... tools so that you can manipulate a FAT-formatted floppy. ... Mounting floppies is rather dangerous as one tends to forget ...
    (linux.redhat)
  • Re: 2 Ch Mixer Recommendation Wanted
    ... >Plug her Mic in and get the gain set. ... As a matter of fact, once it's st up the first time, she ... Or her door. ... >> Bob Simon ...
    (rec.audio.pro)