Re: CAN'T LOGIN!! (urgent)

When trying to connect to \\servername\c$ i get connection can't be made.
Reason most likely cause c by default isn't being shared. The network
registry can't be accssed due it i telling me the service isn't enabled.
Booting the server in safe mode may allow login?

"Pegasus (MVP)" wrote:

I can't tell. When you write "I actaully had already tried to
get to c$ drive over the network that didn't work" you need
to be a lot more specific. Take off your user's hat and put
on your administrator's hat, by writing precisely WHAT
YOU DO to make the connection and WHAT YOU SEE
when it does not work. We can't see your screen, only
you can!


"Tom B" <TomB@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:B9B533A6-A78D-49BE-887D-163C4CFB3C32@xxxxxxxxxxxxxxxx
I actaully had already tried to get to c$ drive over the network that
didn't
work. I also tried to do a remote connect through the regedit and that was
a
no go. I got an error how remote registry service may not be enabled. I
can
get to all my regular shared drives just not c and can't connect remotly
through regedit and i can't get on locally at the machine. Any other
ideas???


"Pegasus (MVP)" wrote:

P.S. I'll be off the air for the next 7 hours. Hope you can
resolve your problem in the meantime!


"Tom B" <TomB@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:846494B6-3880-4319-B454-F83705030E0E@xxxxxxxxxxxxxxxx
Ok well it became urgent cause at first we thought it was temrinal
service
issue only but today we needed access to the box and went physically
there
and had this happen.

How can i get in system32 folder form another pc? and how can edit the
srever regsitry form another pc? Cause i think 1 or both those issues
need
to
be resolved.

"Pegasus (MVP)" wrote:


"Tom B" <TomB@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:65091C16-FED8-4236-9435-EED882F9A036@xxxxxxxxxxxxxxxx
I have win2k DC server i have noticed that the last couple of days
every
time
we would try to login with the admin account through terminal
services
it
would try to login then immediately log us out before the desktop
even
loaded. Today we tried to login in directly on the server itself
and
we
type
the password it looks like it will load then immediately through
us
back
to
the ctr alt delete screen this is a DC server and we need to get
in
what
is
going on???

There are several possibilities:
1. userinit.exe is does not exist in the system32 folder.
2. HKLM/Software/Microsoft/Windows NT/Current
Version/Winlogon/Userinit
does not point at userinit.exe in the system32 folder.
3. Your system drive letter has changed.

You can check Option 1 via a network connection.

You can check Option 2 by opening the server's registry from
some networked PC.

To check Option 3, you should run these commands
from a networked PC:
psexec \\server cmd
echo system (make a note of the response!)

If the system drive letter is incorrect then you can set
it right by editing this value in the server's registry:
HKLM\SYSTEM\MountedDevices. Simply rename
the drive letter that you noted to C:. You must then
reboot the server.

BTW, what is the sudden urgency, after two days?









.

Relevant Pages

  • Re: Cant connect to computers
    ... Now that the connection has been made, ... machine via network neighborhood then the good machine can ... by using Registry Editor or by using another method. ... How much time elapses between when the laptops ...
    (microsoft.public.windows.server.networking)
  • Re: Old LAN Connection
    ... To rid your computer of the phantom adaptor follow the instructions here: http://support.microsoft.com/kb/269155 If after doing the above you still have problems then delete the registry entries for the network adapter. ... Remembering back to the original post, the problem is that although my network connection works fine for me to be on the Internet, I can never see the status. ... You could try deleting all the NIC devices shown in device manager, rebooting the PC, and letting XP find the NIC and reinstall the device drivers. ...
    (microsoft.public.windowsxp.general)
  • Re: WCESmgr ActiveSync app wont start
    ... when try to open ActiveSync WCESMGR will appear in running processes for a ... and the connection is available via Network Connections. ... What files were left in registry to delete and what program did you ...
    (microsoft.public.pocketpc.activesync)
  • Re: Strange Folder
    ... disabled all the admin shares. ... wasn't visible in "Network Neighborhood" or "My Network Places". ... (IPSec port filters or Internet Connection Firewall), ... > registry key fixes some of the associated problems. ...
    (Incidents)
  • Re: Remote Desktop Disconnects
    ... When I've seen this symptom, looking at the devices connecting the server to the Internet, and the traffic load, has usually been helpful. ... An RDP or VPN connection should be able to stay up for hours if not days at a time, even with bottom rung consumer grade equipment and connections. ... Contact the network adapter manufacturer or contact the original equipment ... Modify the registry to disable Receive Side Scaling ...
    (microsoft.public.windows.server.sbs)
Quantcast