Re: After installing SP1 network connections folder is empty
- From: Pedram <Pedram@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 20 Apr 2006 08:44:02 -0700
Thanks. This worked.
"Jabez Gan [MVP]" wrote:
A copy and paste from a solution posted by another user, titled "Server 2003.
issues after SP1 with a 2000 DC"
-----------
Hi List,
This is the answer to a problem not a question.
It took me a day to work this out after some intense googling and
searching of Microsoft KB. So I decided for the benefit of everyone I
would share my knowledge.
The scenario is:
Windows 2000 SBS domain controller
Windows 2003 Member Server
Apply SP1 to 2003 server, networking dies, unable to connect to domain,
Event ID 10016 DCOM / COM+ objects failing to start.
In simple terms, SP1 changes the way some of the security is handled
around loading these COM objects. This is "Impersonate a client".
If you 2003 server is already on, or you join a 2000 domain it will
recieve a 2000 domain group policy. The "Impersonate a client" rights
set in this policy are not sufficient to allow the 2003 server COM
objects to start.
To fix the problem, you will need to uninstall SP1 or remove the 2003
member server from the domain and reboot.
Your networking etc should be returned to normal.
Edit the default domain policy on the DC (access to this through
Administrative Tools / Active Directory users and computers).
Drill down to:
Computer configuration / Windows Settings / Local Policies / User
Rights Assignments / Impersonate a client after authentication
Add the following : Service IIS_WPG ASPNET Administrators and
Administrator
When done you can close the policy editor.
On your 2003 member server you can now rejoin the domain, or reapply
SP1. It will take a couple of reboots before you have the policy and
it is installed.
Apparently MS are aware of this little feature be don't publicly share
it.
As I say, it took me a day of scouring the net to work this out, if I
used some of your ideas or posts thank you!
I hope this is helpful to you.
Chris
-----------
Hope this helps.
--
Jabez Gan [MVP]
Microsoft MVP: Windows Server
http://www.blizhosting.com
MSBLOG: http://msblog.resdev.net
"Pedram" <Pedram@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:9661DA86-D993-4094-BB22-D86FB63F5EFD@xxxxxxxxxxxxxxxx
I have a bunch of windows 2003 servers that need to be upgraded to SP1. But
after the upgrade the network connections service cannot start.
After the installation of the SP1 when the server reboots, COM+ Event
System
service gets stuck in starting mode and cannot completely start. Network
Connections service also cannot start and as a result in the network
connections page there is not connections visible.
I have looked at the Article ID 909444 from the knowledge base and applied
the solution that is provided in there but still the problem is not
resolved.
- References:
- Re: After installing SP1 network connections folder is empty
- From: Jabez Gan [MVP]
- Re: After installing SP1 network connections folder is empty
- Prev by Date: Re: Domain Controller Priority
- Next by Date: Security event log search
- Previous by thread: Re: After installing SP1 network connections folder is empty
- Next by thread: Domain Controller Priority
- Index(es):
Relevant Pages
|
Loading
