Re: IIS webservice IP issue

had same problem, way around it for me was to assign individual static IP on
each NIC...

"Anurodh Pokharel" <anurodhp@xxxxxxxxxxxxxxxxx> wrote in message
news:WLOdnXiT8r-Y1-PenZ2dnUVZ_sSdnZ2d@xxxxxxxxxxxxxx
>
> Both cards are on the same network (subnet 255.255.255.0) and the same
> gateway. the only reason why it has two cards is it used to run XP
> server before and IIS 5 didnt support multiple domains on the same IP.
> -Anu
>
>
>
> "Miha Pihler [MVP]" <mihap-news@xxxxxxxxxxx> wrote:
>>This would usually depend on TCP/IP configuration of your server...
>>
>>Can you tell us a bit more about it? What are subnets of the network
>>cards?
>>Did you set default gateway on both of them, etc...
>>
>>--
>>Mike
>>Microsoft MVP - Windows Security
>>
>>
>>"Anurodh Pokharel" <anurodhp@xxxxxxxxxxxxxxxxx> wrote in message
>>news:HZKdnbyD0ugSZeHeRVn-qg@xxxxxxxxxxxxxx
>>>
>>>
>>> I have a windows 2003 server with IIS 6 (running in IIS 6 mode) this
>>> machine also has 2 nics with different IPs. Two sites are hosted on the
>>> server and each is bound to an IP in IIS. Accessing the sites works
>>> fine.
>>> My problem is one of the sites (asp.net (1.1) )accesses an webservice
>>> which checks IPs and it will authorized to work with either IP.
>>> What i have now is it connects first with one nic creating a session
>>> with one IP and then later tries to continue that session with the other
>>> nic. This seems to happen randomly.
>>> Anyone know how to make IIS limit outbound connections to a single Nic?
>>>
>>> Thanks,
>>> -Anu
>>>
>>>
>>> --
>>> Anurodh Pokharel
>>> Anurodhp@xxxxxxxxxxxxxxxxx
>>>
>>
>>
>
>
>
> --
> Anurodh Pokharel
> Anurodhp@xxxxxxxxxxxxxxxxx
>


.

Relevant Pages

  • Re: Is there a need for Ethernet cards for the Amiga
    ... People have their junk boxes full of old ISA network cards, ... rules out sound cards and some network adapters (most NICs, though, ...
    (comp.sys.amiga.networking)
  • Re: Event ID 1000 (Userenv) Error and Event ID 8021 (BROWSER) Error
    ... > destination route entry with the 192.168.0.1 GWY was higher priority, ... > the external network), and from there to the open Internet. ... > An additional item is that it appears that if any of the NICs in the ... > with destination addresses on the 192.168.1 subnet to get to the ...
    (microsoft.public.win2000.dns)
  • Re: Event ID 1000 (Userenv) Error and Event ID 8021 (BROWSER) Error
    ... > destination route entry with the 192.168.0.1 GWY was higher priority, ... > the external network), and from there to the open Internet. ... > An additional item is that it appears that if any of the NICs in the ... > with destination addresses on the 192.168.1 subnet to get to the ...
    (microsoft.public.win2000.networking)
  • Re: Default Gateway Reverts to Old Setting
    ... This server is on the only IP subnet at the client's main office. ... The server has two identical 10/100/1000 NICs, ... TCP/IP is the only network protocol installed. ...
    (microsoft.public.windows.server.networking)
  • Re: Using multiple network cards and IP addresses in one machine
    ... I would remove all the network cards but one and use either DNS ... aliases or IIS virtual web sites to handle the multiple site issues. ... What I've got is a web server behind ISA 2004 and that server has two NICs ... the same subnet - each is for a different site. ...
    (microsoft.public.win2000.networking)