RE: Routes being automatically added to WK3 server routing table

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Hello Crikan,

I find that you may have two adapters on this server. Is it correct? If we
remove the second one, what's the result?

Also, if we use the command line "route delete IP" to delete the added
routes, will these routes be added at once?

In addition, I would like to know if the added routes cause any problem.

Jacky Gu

Microsoft Online Partner Support

When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.

=====================================================

Business-Critical Phone Support (BCPS) provides you with technical phone
support at no charge during critical LAN outages or "business down"
situations. This benefit is available 24 hours a day, 7 days a week to all
Microsoft technology partners in the United States and Canada.

This and other support options are available here:
BCPS:
https://partner.microsoft.com/US/technicalsupport/supportoverview/40010469
Others: https://partner.microsoft.com/US/technicalsupport/supportoverview/

If you are outside the United States, please visit our International
Support page: http://support.microsoft.com/common/international.aspx

=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| Subject: Routes being automatically added to WK3 server routing table
| From: "crikan@xxxxxxxxxxxxxxxx" <crikan@xxxxxxxxxxxxxxxx>
| User-Agent: Xnews/5.04.25
| Message-ID: <OuepuuLqFHA.3516@xxxxxxxxxxxxxxxxxxxx>
| Newsgroups: microsoft.public.windows.server.general
| Date: Wed, 24 Aug 2005 07:54:07 -0700
| NNTP-Posting-Host: host51-34.discord.birch.net 65.16.51.34
| Lines: 1
| Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.general:45795
| X-Tomcat-NG: microsoft.public.windows.server.general
|
| I have an Exchange Server that occasionally gets incorrect routes added
| to its routing table. I would like to prevent these routes from being
| added.
| The Exchange server is a Windows 2003 server, but this was also
| happening to its predecessor, a Windows NT 4.0 Sever. The routes are
| for computers that are on remote subnets that are connected to our
| Corporate network via Private Frame Relay connections. I have one
| persistent route installed on the Exchange Server so it can communicate
| with those computers at the remote locations. Can you tell me what
| could be adding the offending routes and what I can do to stop it.
| Thanks in advanced.
|
| In this first Route Print it is the 10.0.96.150 and 10.1.9.150 routes
| that are causing the problems. The second route print is what the
| routing table should look like.
|
|
|
| IPv4 Route Table
| ========================================================================
| ===
| Interface List
| 0x1 ........................... MS TCP Loopback interface
| 0x10003 ...00 04 76 f4 f2 a9 ...... 3Com 3C996B Gigabit Server NIC
| 0x10004 ...00 30 6e 12 f9 62 ...... HP NetServer 10/100TX PCI LAN
| Adapter
| 0x10005 ...00 30 6e 12 f9 61 ...... HP NetServer 10/100TX PCI LAN
| Adapter #2
| ========================================================================
| ===
| ========================================================================
| ===
| Active Routes:
| Network Destination Netmask Gateway Interface Metric
| 0.0.0.0 0.0.0.0 192.168.1.246 192.168.1.243 20
| 10.0.0.0 255.0.0.0 192.168.1.16 192.168.1.243 1
| 10.0.96.150 255.255.255.255 192.168.1.246 192.168.1.243 1
| 10.1.9.150 255.255.255.255 192.168.1.246 192.168.1.243 1
| 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
| 192.168.1.0 255.255.255.0 192.168.1.243 192.168.1.243 20
| 192.168.1.243 255.255.255.255 127.0.0.1 127.0.0.1 20
| 192.168.1.255 255.255.255.255 192.168.1.243 192.168.1.243 20
| 224.0.0.0 240.0.0.0 192.168.1.243 192.168.1.243 20
| 255.255.255.255 255.255.255.255 192.168.1.243 10005 1
| 255.255.255.255 255.255.255.255 192.168.1.243 192.168.1.243 1
| 255.255.255.255 255.255.255.255 192.168.1.243 10004 1
| Default Gateway: 192.168.1.246
| ========================================================================
| ===
| Persistent Routes:
| Network Address Netmask Gateway Address Metric
| 10.0.0.0 255.0.0.0 192.168.1.16 1
|
|
|
|
| IPv4 Route Table
| ========================================================================
| ===
| Interface List
| 0x1 ........................... MS TCP Loopback interface
| 0x10003 ...00 04 76 f4 f2 a9 ...... 3Com 3C996B Gigabit Server NIC
| 0x10004 ...00 30 6e 12 f9 62 ...... HP NetServer 10/100TX PCI LAN
| Adapter
| 0x10005 ...00 30 6e 12 f9 61 ...... HP NetServer 10/100TX PCI LAN
| Adapter #2
| ========================================================================
| ===
| ========================================================================
| ===
| Active Routes:
| Network Destination Netmask Gateway Interface Metric
| 0.0.0.0 0.0.0.0 192.168.1.246 192.168.1.243 20
| 10.0.0.0 255.0.0.0 192.168.1.16 192.168.1.243 1
| 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
| 192.168.1.0 255.255.255.0 192.168.1.243 192.168.1.243 20
| 192.168.1.243 255.255.255.255 127.0.0.1 127.0.0.1 20
| 192.168.1.255 255.255.255.255 192.168.1.243 192.168.1.243 20
| 224.0.0.0 240.0.0.0 192.168.1.243 192.168.1.243 20
| 255.255.255.255 255.255.255.255 192.168.1.243 10005 1
| 255.255.255.255 255.255.255.255 192.168.1.243 192.168.1.243 1
| 255.255.255.255 255.255.255.255 192.168.1.243 10004 1
| Default Gateway: 192.168.1.246
| ========================================================================
| ===
| Persistent Routes:
| Network Address Netmask Gateway Address Metric
| 10.0.0.0 255.0.0.0 192.168.1.16 1
|

.

Relevant Pages

  • RE: Routes being automatically added to WK3 server routing table
    ... "Routing and Remote Access" enabled on this server. ... If the unexpected routes are not added manually, as you mentioned, we can ...
    (microsoft.public.windows.server.general)
  • RE: VPN issue
    ... Persistent Routes: ... PPP adapter RAS Server Interface: ... Connection-specific DNS Suffix. ...
    (microsoft.public.windows.server.sbs)
  • Re: [Full-disclosure] Fwd: Vista Reduced Function mode triggered
    ... need to be able to talk to the license management server (sorry can't ... licensing process where a VMWare image of a hacked licensing server was ... So I went back to trying to get high def video to work in Media player ... This was all directly after removing the routes, ...
    (Full-Disclosure)
  • RE: Routing problem Terminal Server
    ... When a client connects to the terminal server there should be no additional ... You already have all the routes you need to connect your TS to any computer. ... Also the clients in your remote sites should not need static routes if their ...
    (microsoft.public.windows.server.networking)
  • Setting up a multihomed server.
    ... I'm adding a second NIC to my home Win2003 Server so I can create a separate subnet in order to help me with preparation for 70-291. ... At the moment the machine doesn't seem to realise that is needs to act as a default gateway for the second subnet, rather than just having a second NIC with an assigned IP. ... Would I do this through adding static routes, or is there something else obvious that I've missed? ...
    (microsoft.public.cert.exam.mcsa)