RE: FRS Via 2nd Network Card

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: jcarvalho <jcarvalho@xxxxxxxxxxxxxxxxxxxxxxxxx>
Date: Fri, 17 Jun 2005 10:32:10 -0700

The only way to use the 2 nics is to team them up with nic's software and
agregate the 2 nics, of course that your switch will have to suport this
configuration.

:jc

"Paul" wrote:

> I want to set up FRS on 2 servers.
>
> The directory that will be replicated will contain huge files 500mb+
>
> What we plan todo is put a 2nd 1GB Nic in both servers and have this
> on a seperate network (just the servers 2nd Nics).
>
> Is it possible to tell FRS to use the 2nd NIC to replicate??
>
> Thanks In Advance
> Paul Cassidy
> Tech Support
>
.

References:
- FRS Via 2nd Network Card
  - From: Paul

Prev by Date: Re: correct way to block net access???
Next by Date: RE: i is not accesible access
Previous by thread: Re: FRS Via 2nd Network Card
Next by thread: Re: Terminal Server Licensing
Index(es):
- Date
- Thread

Relevant Pages

Re: Cisco 4507R and Broadcom NetXtreme NICs
... We are having an issue with Broabcom Gigabit NetXtreme Nics. ... Our servers are IBM 336 with the previously mentioned NIC ... We also tried different ports on the blade and switch ...
(comp.dcom.sys.cisco)
Re: Cisco 4507R and Broadcom NetXtreme NICs
... We are having an issue with Broabcom Gigabit NetXtreme Nics. ... Our servers are IBM 336 with the previously mentioned NIC ... We have replaced the motherboard on the IBM servers. ... We also tried different ports on the blade and switch ...
(comp.dcom.sys.cisco)
FRS Via 2nd Network Card
... I want to set up FRS on 2 servers. ... on a seperate network (just the servers 2nd Nics). ... Is it possible to tell FRS to use the 2nd NIC to replicate?? ...
(microsoft.public.windows.server.general)
Re: A duplicate name has been detected on the TCP network
... Load Balancing splits the work load between two servers. ... > |>Your computer only needs one IP address to communicate with the subnet. ... > |>Generally a machine with two NICs is called "multi-homed" and has each ...
(microsoft.public.windows.server.networking)
Re: In over my head... sbs 2003, router
... The two Nic setups allow the SBS servers to be isolated from each other so ... If you shift to single NICs you'll ... Since VPN port 1723 is hardcoded into Windows and can't be forwarded to ...
(microsoft.public.windows.server.sbs)