Disks and hardware mapping?

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Olav Tollefsen (x_at_y.com)
Date: 02/14/05 

Date: Mon, 14 Feb 2005 17:21:04 +0100

Windows Server 2003

I have 9 disks showing in Disk Manager (Disk 0 .. Disk 8), but I have no
clear view where I can see the mapping between the disks and which hardware
controllers they are connected to.

How can I get a reasonably good view on which disks that are connected to
which physical disk controller?

Olav

Relevant Pages

  • Re: Accessing disks via their serial numbers.
    ... with multiple controllers using the same driver there is ... you have to replace broken hardware. ... someone has two fxp adapter configured on system. ... they have disks as children. ...
    (freebsd-arch)
  • Re: Problem with sata2 and raid1.
    ... so I have therefore installed a RocketRaid 1720 PCI-card to get the necessary hardware support. ... would like to know if the data already located on the disks is accessible to the Fedora driver or if I have to reformat the drives and install all the enchilada from the beginning? ... the controllers bios is used for some operations. ...
    (Fedora)
  • Re: Problem with sata2 and raid1.
    ... necessary hardware support. ... Fedora driver or if I have to reformat the drives and install all the enchilada ... disks, so your data may be readable. ... the controllers bios is used for some operations. ...
    (Fedora)
  • Re: OpenVMS and Smart Array Controllers
    ... Was there a reason why support for the P600 wasn't added? ... Is P600 the PCI-X based SmartArray controller for SAS disks? ... The SmartArray controllers are always a bit of a challenge for VMS (and ...
    (comp.os.vms)
  • Re: 4.3 BSD on a uVAX (KA630) ?
    ... Which release supports MSCP Disks and TMSCP boot? ... This is a problem only if you use DSSI ... Any Unix-like OS apart from Ultrix actually only knows how to talk with directly attached controllers like the UDA-50. ...
    (comp.sys.dec)