RE: RIS server installing very slow
From: Bill (btarlton_at_IASISHealthcare.com)
Date: 08/11/04
- Next message: Laura E. Hunter \(MVP\): "Re: windows needs your current credentials"
- Previous message: Peter Newman: "Prob with Scheduler"
- In reply to: RonB: "RE: RIS server installing very slow"
- Next in thread: RonB: "RE: RIS server installing very slow"
- Reply: RonB: "RE: RIS server installing very slow"
- Messages sorted by: [ date ] [ thread ]
Date: Wed, 11 Aug 2004 07:49:28 -0700
Hi Ron,
I am plugged into a D-Link 100 base hub. I have also tried
taking it into our main switch at a gig and no difference.
I have only tried this one pc (we have about 20 of them to
roll out) which is a Dell GX270 Pentium 4. I think it's a
3.2 ghz with a 800fsb. I have not defraged the server
thats pushing the images it is a fairly new install so I
dont think it needs to be defragged quite yet. Im thinking
something is up with the nic drivers or the actual nic
itself. Im going to try another machine here with a diff
nic card in a few minutes.
>-----Original Message-----
>Good question, I've ran accross this myself several times.
>
>I haven't got the answer, just more questions...
>
>What kind of client is it? Pentium 1 or 2 ?
>
>What kind of NIC 10/100/1000 ?
>
>Is the HUB a 10MB ?
>
>Do other machines plugged into the same drop (catV?) work
OK ?
>
>Does it have a celeron processor or something with a
small front side bus on
>the motherboard ?
>
>Have you DEFRAG'd the machine containing the images ?
>
>I haven't had time to nail this one down yet.
>
>
>
>
>"Bill Tarlton" wrote:
>
>> Hi,
>>
>> I just setup RIS server and have loaded both Windows
2000
>> and Windows XP onto it for rollout. When I connect with
>> PXE from a workstation I get logged into the server
just
>> fine but when it actually starts the initial process of
>> loading files for SCSI and USB and other drivers it
goes
>> soooo sloooww I even left it running overnight and came
>> back the next morning and it was hanging on prepairing
to
>> start windows installation (you know where it is about
to
>> start the GUI setup)...I have tried changing hubs im
>> plugged into to no avail. Any ideas or advice on how to
>> resolve this issue?
>>
>> Thanks
>>
>.
>
- Next message: Laura E. Hunter \(MVP\): "Re: windows needs your current credentials"
- Previous message: Peter Newman: "Prob with Scheduler"
- In reply to: RonB: "RE: RIS server installing very slow"
- Next in thread: RonB: "RE: RIS server installing very slow"
- Reply: RonB: "RE: RIS server installing very slow"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
