Re: strange dns client errors

In news:Oax5MeJCHHA.3448@xxxxxxxxxxxxxxxxxxxx,
Franz Schenk <franz.schenkNOSPAM@xxxxxxxxxxxxxxxx> stated, which I commented
on below:
Thank you for your feedback, some additional information:

- Client IP configuration:
DHCP enabled. . . . . . . . . . : Yes
IP Adress. . . . . . . . . . . . : 10.42.0.140
Subnet Mask. . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.42.0.15
DHCP Server . . . . . . . . . . . : 10.42.0.16
DNS Servers. . . . . . . . . . . . : 10.42.0.16
10.42.0.23
Primary WINS Server. . . . . . . : 10.42.0.16
Secondary WINS-Server. . . . . . : 10.42.0.23

- There are no forwarders configured on both DNS Servers
- There are three correctly configured reverse lookup zones for the
networks 10.42.0.0/24, 10.42.2.0/24 and 10.42.3.0/24.
- There is absolutly no host with an address 10.1.1.1, and a network
that begins with 10.1 is unknown. All networks are in the range of
10.42.x.x - ICS was never configured on the network
- Both DNS Servers are not mulithomed
- DHCP is only configured on the server 10.42.0.16 for all scopes


Thank you in advance for any further help!
Franz

Interesting Franz, that it's not specified anywhere. Strange. Curious, how
about in a GPO? If I can think of anything else, I'll let you know.

Ace


.

Relevant Pages

  • Re: DHCP Problem causing ip to be 169.X.X.X and not 192.168.X.X
    ... > their configuration to limit the number of clients they will serve DHCP to. ... My linksys router is set to 50. ... Did that and my virus checker, still no ip address from DHCP on the linksys. ... and use what it is using for DNS servers. ...
    (microsoft.public.windowsxp.network_web)
  • Re: strange dns client errors
    ... Client IP configuration: ... There are no forwarders configured on both DNS Servers ... There are three correctly configured reverse lookup zones for the networks ... - ICS was never configured on the network ...
    (microsoft.public.windows.server.dns)
  • Re: DHCP Problem causing ip to be 169.X.X.X and not 192.168.X.X
    ... their configuration to limit the number of clients they will serve DHCP to. ... If your router was set up by your ISP, they may have set this to just the ... and use what it is using for DNS servers. ...
    (microsoft.public.windowsxp.network_web)
  • Re: AD - Computer Policy
    ... if you are not statically configuring tcp/ip then you can use a dhcp ... server/scope to assign tcp/ip configuration including dns servers. ... network assuming it uses dhcp. ... I set up an AD COMPUTER Policy in my domain to set the DNS servers in IP ...
    (microsoft.public.win2000.security)
  • Re: Actiontec GT704 and DNS
    ... I have found that if I set up the router in DHCP configuration, ... IP address and the local ISP DNS server IP address rather than the IP ... DNS servers that are not associated with your ISP. ... open up a command prompt and issue the command "IPCONFIG /renew" ...
    (comp.dcom.xdsl)