Re: DNS dynamic update pending in DHCP

Have you assigned a user account with a non-expiring password in the DHCP scope properties for the DHCP server to authenticate with the DNS server? Or did you change that password recently?
are you seeing errors in eventvwr.

You can also run network monitor to check what is going on...

--
I hope that the information above helps you
Good Luck

Jorge Silva
MCSA
Systems Administrator

"levd" <levd@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:E63D4FDE-169B-48B8-B20A-98F9DE2A4D8A@xxxxxxxxxxxxxxxx


"Ace Fekay [MVP]" wrote:

In news:024332EE-D71F-45E5-9F10-37CA42333915@xxxxxxxxxxxxx,
levd <levd@xxxxxxxxxxxxxxxxxxxxxxxxx> stated, which I commented on below:
> Hello,
>
> Al clients have a new ip address from the new DHCP server.
> The old DHCP server is not running anymore.
> Vlans are configured correctly.....
> ALso the clients are working correctly but i never seen this icon
> with a pencil before....and i wonder why the dynamic dns update is
> pending...
>
> Thx,
> LEVD

Did you confirm this (as Jorge asked as well)? When you run an ipconfig /all
on the client, I assume it shows the new DHCP?
Did you unauthorize the old one?

Also, the only time I've seen a pencil is in third party DHCP servers.
HOwever, if it is having difficulty updating into DNS, then it may be a red
flag that the incorrect DNS servers are being referenced. This means in an
AD environment, only the internal DNS servers are to be used. If it is
pointing to an ISP's DNS or some other DNS (or even the Linkysys router)
that is not accepting updates or doesn't host the zone, then we have a
mis-configuration.

Can you provide an unedited ipconfig /all of a machine in question and the
DC please (assuming this is your DHCP server). - Thanks!

Ace





Hi there,

The clients recieve correct ip adresses from the correct DHCP server.
The old DHCP server is unautherized.
Im using internal DNS servers

Thank you.

.

Relevant Pages

  • Re: Home PCs and DNS addresses
    ... workstations with a static IP address and the following DNS servers: ... I shut down the SBS. ... Ideally, I'd like the DHCP server in SBS to dole out it's address, and my ... ISP's addresses as DNS entries for all workstations on the local network. ...
    (microsoft.public.windows.server.sbs)
  • Re: Why does sys-unconfig want addresses for DNS servers when configuring DHCP?
    ... But when I run sys-unconfig to set up DHCP, the sys-unconfig program insists me telling it the IPs of the DNS servers. ... Is there a way to configure a Sun to use DHCP, and it get both the IP address, the default route and the addreses for the DNS servers from the DHCP server? ... LinkSys BEFSR-81 serves as both router and DHCP server. ...
    (comp.unix.solaris)
  • Re: Sites and services
    ... If new PC's came on to the network and the only DHCP server was down then ... to tie clients to a particular site. ... >>how your DNS servers themselves are configured, ...
    (microsoft.public.windows.server.active_directory)
  • Re: DNS addresses changing spontaneously without DHCP query
    ... > The PCs in our domain are supposed to use our 2 domain controllers as ... Our campus DHCP server tells them this, ... > they boot up or ipconfig /renew. ... > to using a different set of DNS servers on ...
    (microsoft.public.windows.server.dns)
  • Re: Livebox with 98?Any experience start again
    ... DHCP Server 255.255.255.255 ... You should not have any dns servers set, you should not have anything set ... Make sure that you have no gateway ...
    (uk.telecom.broadband)