Re: Workstations Cannot Access Internet, Server Can

Ashwood wrote:
Thank You Kevin for your reply.

No there is no proxy server installed!

I understand the long term benefits that we should reconfigure the
workstations directly and remove the multihomed config on the server.

However as this is now critical would setting up NAT on the server be
an immediate solution and if so what would be the best way to do this.

I don't understand as up until last Thurs this config was working
fine until I replaced the onboard nic to a PCI 1Gb version!!!!

If it worked until you replaced the NIC, then at that time you had NAT
installed. All you would have had to done at that time was to add the new
NIC as an NAT enabled interface.
As for now, I'm not sure if NAT is still installed in RRAS, if it's not add
NAT, then add the two interfaces with NAT enabled on the external interface,
and the internal interface configured as a private interface.
It's really a pretty straight forward configuration. Win2k3 RRAS labels each
interface rather plainly.


--
Best regards,
Kevin D. Goodknecht Sr. [MVP]
Hope This Helps
===================================
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
===================================
http://www.lonestaramerica.com/
http://support.wftx.us/
http://message.wftx.us/
===================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
===================================
Keep a back up of your OE settings and folders
with OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
===================================


.

Relevant Pages

  • Re: NAT without DHCP? (w2k3)
    ... My guess is that you have not configured the public interface correctly. ... How does your server connect to the Internet? ... set to the private address of the NAT machine? ...
    (microsoft.public.windows.server.networking)
  • Re: Trying to connet to Telia(Skanova) ADSL provider in Sweden with 837
    ... >>These Cisco 837 Config Wizards may or may not help you: ... > interface ATM0 ... > ip nat outside ... > bridge 1 protocol ieee ...
    (comp.dcom.sys.cisco)
  • Re: cannot ping from subnet A to subnet B for a specific host
    ... It appears that whoever set up the router config wanted only one-way ... Interface, and the Interface on the .5 network as the destination NAT ...
    (microsoft.public.win2000.dns)
  • Re: cisco static nat
    ... so your setup would route traffic looking for a server at 85.86.87.2 to ... ip nat inside source route-map nonat interface Dialer0 overload ... ip nat inside source static 192.168.1.1 85.86.87.1 route-map nonat ... no ip directed-broadcast ...
    (microsoft.public.windows.server.networking)
  • RE: NAT and PPPoE problems
    ... About the only differences I see in your config vs. mine is that you've ... ed1 interface in rc.conf. ... connection, use ppp's NAT facility ... No employee or agent is authorized to conclude any binding agreement on behalf of Watkins Contracting, L.P., with another ...
    (freebsd-questions)
Loading