Re: W2K3 Enterprise R2 servers not accessible

Rachel L Chipman wrote:
If I am on one of the machines that I can't get to through Network
Places (I can connect to them using VNC)

Network Place requires NetBIOS resolution if you cannot browse to the
machines in Network Places, it is a NetBIOS problem. NetBIOS over TCP/IP
must be enabled and the NIC must be on the same subnet.
If it is on a different subnet, you need WINS for browsing. Lmhosts will
work too, but frankly WINS is better because it is dynamic. Something else
about WINS, you can configure your default domain zone, the one in your DNS
suffix search list, to search a WINS server for unknown hosts.(WINS tab of
the zone properties) That means it is unnecessary for clients to register in
DNS.

and I run nslookup (I just
type nslookup at the cmd prompt), I get the default server and IP
address of my DNS server. Is this what I should be getting?
This is nslookup performing a reverse lookup on the DNS server IP.



If I run nslookup on my Domain B server, I get the following message:
"DNS request timed out. Timeout was 2 seconds. *** Can't find
server name for address ##.###.##.##: Timed out.
Default server: Unknown
Address: ##.###.##.##

What needs to be done to resolve this? This COULD be what is causing
my other problems...?

This is nslookup doing a reverse lookup on the IP of the DNS server and it
cannot find a PTR, this has no bearing on whether DNS is working or not,
create a PTR for the IP address.


--
Best regards,
Kevin D. Goodknecht Sr. [MVP]
Hope This Helps
===================================
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
===================================
http://www.lonestaramerica.com/
http://support.wftx.us/
https://secure.lsaol.com/
===================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
===================================
Keep a back up of your OE settings and folders
with OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
===================================


.

Relevant Pages

  • Re: W2K3 Enterprise R2 servers not accessible
    ... "Are you able to resolve their IP addresses using ... I have gone to a DOS prompt on my server in Domain B. I type nslookup and ... it now brings back the DNS server information. ...
    (microsoft.public.windows.server.dns)
  • Re: Cannot Resolve Names Outside Windows Domain
    ... As I posted previously, at your suggestion, I tried the nslookup command outside of the windows domain. ... The result show nslookup is trying to use the windows domain 192.168.1.2 even when that name server is unavailable. ... Presumably if nslookup resolved to the IPS name server, the laptop could resove names and would allow internet browsing? ... you wrote that you have an assigned DNS server that you can ping. ...
    (microsoft.public.windowsxp.network_web)
  • netbios dns and node types
    ... be a WINS server to query is B node the only type to use as thats the only ... if it doesnt matter if asking a netbios name server is in the ... node would be the more efficient as it would not broadcast and get to DNS ... Checking with a DNS server ...
    (microsoft.public.win2000.dns)
  • netbios dns and node types
    ... be a WINS server to query is B node the only type to use as thats the only ... if it doesnt matter if asking a netbios name server is in the ... node would be the more efficient as it would not broadcast and get to DNS ... Checking with a DNS server ...
    (microsoft.public.win2000.networking)
  • Re: Some DNS server names will not resolve using internal servers
    ... DNAME do in fact redirect queries from zone A to zone ... Until you can show the actual NSLookup responses ... DNS server (to prove that there is not some weird interaction ... We have not rebooted the DNS server yet. ...
    (microsoft.public.windows.server.dns)
Loading