sbs2003 companyweb page dns error

Tech-Archive recommends: Speed Up your PC by fixing your registry

From: rj (anonymous_at_discussions.microsoft.com)
Date: 07/24/04 

Date: Fri, 23 Jul 2004 17:55:52 -0700

I have installed a new server with sbs2003 into a prior
workgroup system. The system had a dsl router with dhcp
which I left intact. My server has two nic's one with a
static address for the intranet and one dynamic from the
router to the internet. All of the work stations except
one is working. I have one that when you go to ie6 and
want it to come up to the http:\\companyweb page it comes
up with unable to locate page and at the bottom it says
dns error or server un reachable. I can type in any
other address and reach it on the interner. I am able to
log users on with a roaming profile from this work
station. In the network settings for the work station, I
have a dynamic ip address with an assigned dns the same
as the other work stations. I am using 192.168.1.11 for
dns and the server local network address. the work
station has a dynamic with the dns assigned as
192.168.1.11. The router is 192.168.1.1 I used the
\\server\connectcomputer command for the work station.

I have also removed some software I found in it called my
way which appeared to redirect requests. I am very open
to suggestions as to what I can do. Could it have
something to do with the additional interner connection
sharing that is on the computer, and if so how do I
remove it. Sorry to ramble, just thought the more info
the easier it might be for someone to direct me to the
answar.

neeting help,
rj

Relevant Pages

  • Re: Cannot connect to RWW from home PC
    ... eth0 172.26.0.1/16 Extra none ... That would be the address you need a DNS record for. ... One question - if I reset the Thomson Router will that clear all the ... Heres' the info for our server: ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot connect to RWW from home PC
    ... No 10.0.0.138 is the address used to log onto Thomson's router to make the ... On the DNS question I can add an MX record in the DNS area of GoDaddy's ... eth0 172.26.0.1/16 Extra none ... Heres' the info for our server: ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... NIC, you need to specify an external DNS server for DNS, instead of the ... Both NICs should point to his internal IP for DNS. ... forward ports to it reliably in the router. ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot connect to RWW from home PC
    ... You say "And in the router you need to forward to your external nic IP" ... You say "You need the domain hoster to setup a DNS record that will be ... We have rerun CEICW sort of hoping it would sort out the router but no ... Heres' the info for our server: ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... Even a single-NIC configuration should have ONLY the LAN IP of the server as ... Then you can run the CEICW or use the DNS console to enter ... forward ports to it reliably in the router. ... I should have been more clear about internet connection.. ...
    (microsoft.public.windows.server.sbs)