Re: Event ID 1123 and 1122

We added Intel cards to all our Dell's. Then teamed them for the Public. We
only use the Broadcom's for the heartbeat.

Cheers,

Rodney R. Fournier

MVP - Windows Server - Clustering
http://www.nw-america.com - Clustering Website
http://msmvps.com/clustering - Blog
http://www.clusterhelp.com - Cluster Training
ClusterHelp.com is a Microsoft Certified Gold Partner


"John Toner [MVP]" <jtoner@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:%23cZszGpNIHA.4272@xxxxxxxxxxxxxxxxxxxxxxx
Broadcom strikes again!

Regards,
John

Visit my blog: http://msmvps.com/blogs/jtoner

"Chuck [MSFT]" <ctimon@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:ev$cLGhNIHA.4136@xxxxxxxxxxxxxxxxxxxxxxx
OK, so I reviewed the case which is owned by an Engineer on the team here
in
NC. There is an outstanding request made for the removal of a Broadcom
driver and we are waiting for that to happen before moving forward.

--
Chuck Timon, Jr.
Microsoft Corporation
Windows Server 2008 Readiness Team
This posting is provided 'AS IS" with no warranties, and confers no
rights.


"Sabo, Eric" <sabo_e@xxxxxxx> wrote in message
news:ebpRmkfMIHA.2208@xxxxxxxxxxxxxxxxxxxxxxx
As soon as I get it from Dell you will be the first to know. I
requested you to look at it because you are top notch!

Thank again Chuck!


"Chuck [MSFT]" <ctimon@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:uyLew5bMIHA.4880@xxxxxxxxxxxxxxxxxxxxxxx
So, you have an MS case open and you are working with a cluster
engineer?
If yes, can you post the case# for me?

Thanks.

--
Chuck Timon, Jr.
Microsoft Corporation
Windows Server 2008 Readiness Team
This posting is provided 'AS IS" with no warranties, and confers no
rights.
"Sabo, Eric" <sabo_e@xxxxxxx> wrote in message
news:%23MnYuvaMIHA.5224@xxxxxxxxxxxxxxxxxxxxxxx
Like I said they have been on it for a couple of weeks with no end in
site.



"Edwin vMierlo [MVP]" <EdwinvMierlo@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote
in
message news:ORUEB7ZMIHA.5860@xxxxxxxxxxxxxxxxxxxxxxx
time to involve Microsoft support !
(as Chuck already mentioned)

"Sabo, Eric" <sabo_e@xxxxxxx> wrote in message
news:u%23k0APRMIHA.3400@xxxxxxxxxxxxxxxxxxxxxxx
Yes the event are still happening...

I am at a lost on this issue, it has happened ever since we
deployed
the
cluster that was back in middle september.



"Edwin vMierlo [MVP]" <EdwinvMierlo@xxxxxxxxxxxxxxxxxxxxxxxxx>
wrote
in
message news:uY5HSjPMIHA.4712@xxxxxxxxxxxxxxxxxxxxxxx
and still the same events ?


"Sabo, Eric" <sabo_e@xxxxxxx> wrote in message
news:ujTREgPMIHA.5980@xxxxxxxxxxxxxxxxxxxxxxx
We have that multicast disabled currently.


"Edwin vMierlo [MVP]" <EdwinvMierlo@xxxxxxxxxxxxxxxxxxxxxxxxx>
wrote in
message news:%2357mCbOMIHA.5400@xxxxxxxxxxxxxxxxxxxxxxx
is multicasting (on your cluster) enabled or disabled ?


"Sabo, Eric" <sabo_e@xxxxxxx> wrote in message
news:e1ZEVIOMIHA.4880@xxxxxxxxxxxxxxxxxxxxxxx
Chuck,

I have a case open with Dell and they supposly took it to
Microsoft.
But we are still getting no where with the issue.



"Chuck [MSFT]" <ctimon@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:%23i5tIwKMIHA.1164@xxxxxxxxxxxxxxxxxxxxxxx
Correct, use the info in the KB. Or, open a Perf case with
us
to
figure
out the real issue.


--
Chuck Timon, Jr.
Microsoft Corporation
Windows Server 2008 Readiness Team
This posting is provided 'AS IS" with no warranties, and
confers
no
rights.
"Sabo, Eric" <sabo_e@xxxxxxx> wrote in message
news:Oe2K5iEMIHA.4272@xxxxxxxxxxxxxxxxxxxxxxx
Still nothing...

Should I measure the DPC of the NIC?

So from what you are saying I should adjust the settings
on
the
heartbeat
via the command line.

Are there any post sp2 cluster patches that might help?

"Chuck [MSFT]" <ctimon@xxxxxxxxxxxxxxxxxxxx> wrote in
message
news:eTjBL2DMIHA.5328@xxxxxxxxxxxxxxxxxxxxxxx
You can run SCC and still take advantage of the new
settings
without
suing a FSW

DPC = Deferred Procedure Call

http://www.microsoft.com/whdc/Driver/tips/DPC_ISR.mspx


--
Chuck Timon, Jr.
Microsoft Corporation
Windows Server 2008 Readiness Team
This posting is provided 'AS IS" with no warranties, and
confers
no
rights.
"Sabo, Eric" <sabo_e@xxxxxxx> wrote in message
news:eGjMcfBMIHA.4740@xxxxxxxxxxxxxxxxxxxxxxx
Chuck,

I don't think that article applies, we are running SCC.

Clussvc.exe is at 5.2.3790.3959 if this helps at all.

Yes, I have been troubleshooting these events ever since
we
installed
this cluster.

What do you mean by DPC ?

Thanks for all your help on this issue.

"Chuck [MSFT]" <ctimon@xxxxxxxxxxxxxxxxxxxx> wrote in
message
news:eoVeA64LIHA.484@xxxxxxxxxxxxxxxxxxxxxxx
The failover only occurs when there is a 'true'
failure....so,
if
you
went through the article how did you investigate the
DPC
issues?
Those are the trickiest to, first, find, and then
address.
With
a
new
hot fix designed specifically for Exchange 2007 CCR,
you
can
actually
tune some parameters now that will help alleviate the
1123
errors
=
http://support.microsoft.com/kb/921181/

--
Chuck Timon, Jr.
Microsoft Corporation
Windows Server 2008 Readiness Team
This posting is provided 'AS IS" with no warranties,
and
confers
no
rights.


"Sabo, Eric" <sabo_e@xxxxxxx> wrote in message
news:e$4KWB3LIHA.2208@xxxxxxxxxxxxxxxxxxxxxxx
Chuck,

Any other articles, unfortunately I went through each
and
every
step
describe in the article and still haven't been able to
get
rid
of
the
1123 and 1122 events.

I am at a lost on this issue.

So far the cluster resources haven't failed over.

"Chuck [MSFT]" <ctimon@xxxxxxxxxxxxxxxxxxxx> wrote in
message
news:%23LB5zBiLIHA.4228@xxxxxxxxxxxxxxxxxxxxxxx

http://support.microsoft.com/default.aspx?scid=kb;en-us;892422


--
Chuck Timon, Jr.
Microsoft Corporation
Windows Server 2008 Readiness Team
This posting is provided 'AS IS" with no warranties,
and
confers
no
rights.
"Sabo, Eric" <sabo_e@xxxxxxx> wrote in message
news:ui7obxeLIHA.5244@xxxxxxxxxxxxxxxxxxxxxxx
I need some opinions on how to correct getting Event
ID
1123
and
Event ID 1122 on all cluster nodes every hour. This
is
a
three
node cluster running Windows 2003 SP2 - Exchange 2007
Update
#
4.

I went through all best practices and nothing really
stands
out
as
a misconfiguration on any of the nodes. Installed
the
latest
network drivers for the network cards.

The cluster hasn't been affected by this yet.

Looking for suggestions on this issue.

Thanks in Advance!
Eric Sabo

































.

Relevant Pages

  • Re: Event ID 1123 and 1122
    ... Chuck Timon, Jr. ... Windows Server 2008 Readiness Team ... I have been troubleshooting these events ever since we installed this cluster. ... What do you mean by DPC? ...
    (microsoft.public.windows.server.clustering)
  • Re: Event ID 1123 and 1122
    ... Chuck Timon, Jr. ... Windows Server 2008 Readiness Team ... I have been troubleshooting these events ever since we installed this cluster. ...
    (microsoft.public.windows.server.clustering)
  • Re: Event ID 1123 and 1122
    ... Chuck Timon, Jr. ... This posting is provided 'AS IS" with no warranties, ... Are there any post sp2 cluster patches that might help? ...
    (microsoft.public.windows.server.clustering)
  • Re: Event ID 1123 and 1122
    ... drivers on the cluster nodes, this happened from the start of this ... support realized that the drivers for the broadcom NIC were just the ... Chuck Timon, Jr. ... Windows Server 2008 Readiness Team ...
    (microsoft.public.windows.server.clustering)
  • Re: Event ID 1123 and 1122
    ... Chuck Timon, Jr. ... Windows Server 2008 Readiness Team ... This posting is provided 'AS IS" with no warranties, ...
    (microsoft.public.windows.server.clustering)
Loading