Re: Cluster Serivce Account

Let me ask this....

Was this cluster created before or after applying SP1?

If you have SP1 installed, then you have the fix in 890761 but you may still want to review the procedures.

Also, even if you moved the cluster computer accounts to an OU and blocked inheritance, if they picked up a policy in the default computers OU before being moved, that policy may still be implemented because it is not a clean removal of policies especially those mentioned in the KB...so review the KB.

If you should choose to rebuild your cluster again, pre-stage the computer accounts in an OU that has inheritance blocked, create and configure the cluster prior to applying SP1 and after all is configured, apply SP1 + Post SP1 hotfixes which for cluster are listed in -

http://support.microsoft.com/kb/923830/en-us

Let us know.

Chuck Timon, Jr.
Microsoft Corporation
Longhorn Readiness Team
This posting is provided "AS IS" with no warranties, and confers no rights.

<josh.lipton@xxxxxxxxx> wrote in message news:1172597460.081462.258520@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On Feb 27, 11:00 am, josh.lip...@xxxxxxxxx wrote:
On Feb 27, 9:58 am, "Edwin vMierlo"





<EdwinvMie...@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
> > > > > > Below is the cluster log entries......

> > > > > > 2007-02-26 15:55:51.024 [INFO] [BC] A runtime error has > > > > > > occurred
> in
> > > > > > file

> 'd:\srvrtm\base\cluster\mgmt\cluscfg\basecluster\cservice.cpp',

> > > > > > line 417. Error code is 0x8007042b.
> > > > > > The error string is 'A problem occurred when the wizard > > > > > > attempted
> to
> > > > > > start a service.'.

> Anything in the cluster log before this runtime error ?

> > I tryed logged on to the console with the domain admin account and
> > logged onto the console with the cluster admin account. I also have
> > the server in its own OU where all domain GPOs are blocked. I am
> > still getting the same error and it will only work with the domain
> > admin account.

> > Josh Lipton
> > Systems Consultant
> > CORE BTS-- Hide quoted text -

> - Show quoted text -

This was the other error codes i found sorry forget to add them to the
post.

Cluster Service Specific Exit Code= 0x000002
Error 0x00042b occurred trying to start the 'ClusSvc' service
Cluster Service Win32 Exit Code= 0x00042b

JL- Hide quoted text -

- Show quoted text -

I just rebuilt the server and to creaTED the cluster with no problem.
This is was very weird maybe someone can give some insight on what
could have happened.

JL


.

Relevant Pages

  • Errors after Upgrading to SP1 for Server 2003
    ... After Approving the updates in SUS for Both Nodes i decided to reboot one of ... reboot the Active cluster just to confirm the update was at fault only to ... where i removed Sp1 the MSDTC service failed to start So i had to forcefully ... Both Servers are Domain Controllers / File Servers Application Servers (DNS, ...
    (microsoft.public.windows.server.security)
  • Re: SP1 AND CLUSTERING DO NOT WORK
    ... (SP1). ... >> assessed this impact to your inter-node communications before deciding to ... >> "A troubleshooter's best tool is the Event Viewer and understanding the ... >>> failure by powering down the hosting cluster, ...
    (microsoft.public.windows.server.clustering)
  • Re: DO NOT INSTALL Windows 2003 SP1 on MSCS!!!
    ... I have to agree with the others, we have a six node exchange cluster on 2003 ... If sp1 caused cluster across the board of any hardware, ... > vendor for their support matrix. ... > This post is offbase and should not discourage you from applying SP1. ...
    (microsoft.public.windows.server.clustering)
  • RE: Windows 2003 SP1 install on cluster and different IRPStackSize val
    ... nodes if this was a problem with SP1. ... The default and range of Microsoft Windows Server 2003 is the same as that for Windows XP. ... Windows NT/2000/2003 Cluster Technologies ... Windows 2003 SP1 install on cluster and different IRPStackSize val ...
    (microsoft.public.windows.server.clustering)
  • RE: Windows 2003 SP1(the official build) and MSCS
    ... Windows NT/2000/2003 Cluster Technologies ... > After installing SP1 for the Windows 2003 Ent. ... > server witch has a clustered spooler and have Windows 2003 SP1 ...
    (microsoft.public.windows.server.clustering)
Loading