RE: Bidirectional Printing Windows 2003 Cluster
- From: v-xuwen@xxxxxxxxxxxxxxxxxxxx (Vincent Xu [MSFT])
- Date: Mon, 05 Jun 2006 06:02:31 GMT
Hi Wayne ,
Based on my research, it looks like the printer driver may have disabled
the bi-direction feature when it is used in the cluster nodes. What are the
printer drivers, are they built-in drivers, or are they downloaded from the
HP websites.
For the built-in drivers, it is possible that the bidirectional feature has
been disabled in clustered spooler because of potential issues with
bidirectional printing. See the following article:
278455 How to set up a clustered print server
http://support.microsoft.com/?id=278455
If it is a HP driver, please check with HP to see if the bi-directional
feature is available on their supplied drivers in clustered printers.
More information for Language monitor
================
The language monitor provides the common language that is needed for the
client and printer to understand each other in bidirectional communication
so that you can configure the printer and monitor printer status. You can
request configuration and status from the printer, and the printer can send
unsolicited status information (such as paper tray empty) to the client.
Windows Server 2003 includes Pjlmon.dll, a language monitor that uses
Printer Job Language (PJL). PJL is the language that implements the
bidirectional communication; it does this by using a parallel port
connection, such as one between a Hewlett-Packard LaserJet 5Si and the
computer. Any bidirectional printer that uses PJL can use Pjlmon.dll.
If a printer uses a different printer language, the vendor can develop a
language monitor for it. A vendor might also develop a language monitor to
add data, such as printer-specific control information, to the print stream
that is going to a unidirectional printer.
To take advantage of bidirectional printing, you need a bidirectional
printer, and a correctly configured bidirectional port and port monitor.
The standard port monitor supports bidirectional communication by default.
Hope this helps!
Best regards,
Vincent Xu
Microsoft Online Partner Support
======================================================
Get Secure! - www.microsoft.com/security
======================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others
may learn and benefit from this issue.
======================================================
This posting is provided "AS IS" with no warranties,and confers no rights.
======================================================
--------------------
microsoft.public.windows.server.clustering:15557Thread-Topic: Bidirectional Printing Windows 2003 Cluster
thread-index: AcaGik9DBGiH5b7uSmuhCPglTBBAfg==
X-WBNR-Posting-Host: 199.68.77.225
From: =?Utf-8?B?d2sxMg==?= <Wk12@xxxxxxxxxxxxxxxx>
Subject: Bidirectional Printing Windows 2003 Cluster
Date: Fri, 2 Jun 2006 14:20:02 -0700
Lines: 13
Message-ID: <85684280-CAD0-4774-AE05-C0C76B2462EE@xxxxxxxxxxxxx>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.windows.server.clustering
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
theNNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.windows.server.clustering
I have a Windows 2003 Print cluster in our environment It was built using
onWindows 2003 "guide to Creating and Configuring a Server Cluster under
Windows Server 2003", "Creating and Configuring a highly Available Print
Server Under Microsoft Windows Server 2003 Using a Server Cluster" and MS
article 278455 "How to Setup a Clustered Print Server".
However the "Enable bidirectional support" is grayed out on the port tab
availableeach printer. We use all HP printers and drivers so I know they have
bidirectional support. You can also enable bidirectional support on a
standard windows 2003 print server. Is there a reason this is not
or is there a way to make it available.
Thanks
Wayne
.
- Follow-Ups:
- Prev by Date: Re: cannot find "clusters service" in add/remove windows component
- Next by Date: Cluster with one node Windows 2000 and other Windows 2003
- Previous by thread: Re: Bidirectional Printing Windows 2003 Cluster
- Next by thread: RE: Bidirectional Printing Windows 2003 Cluster
- Index(es):
Relevant Pages
|
