Re: Win2k3 R2 - Storage Reporting on File Svr Cluster (SCSI-Attach

Chuck,

This is an IBM EXP400 disk array and the ipsha.dll from IBM is loaded. The
logical shared disk seen at drive D:. This is installed on each node,
however, when I browse the server and select any disk letter from the report
scope dialog, i get the error that it's on a cluster server.

The documentation seems a little lacking with setting this up on a cluster
server. Is there anything online to step someone through it?

Thanks in advance,
Paul


"Chuck Timon [Microsoft]" wrote:

To use Storage Resource Manager in R2 you will need a VDS Provider from your
storage vendor installed on each node. Then, in a cluster, to run reports,
you must be running the reports from the node that currently has the volume
online that you want to report on.

--
Chuck Timon, Jr.
Microsoft Corporation
Longhorn Readiness Team
This posting is provided "AS IS" with no
warranties, and confers no rights.

"Paul L" <limahl@xxxxxxxxx> wrote in message
news:e8AZArFbGHA.3444@xxxxxxxxxxxxxxxxxxxxxxx
Greets!

I've recently set up a 2-node file server cluster under Windows 2003 Ent.
R2 with a scsi attached disk array. Failovers work great and life is
grand, however I would like to set up the new R2 features for Storage
Report Management and send out reports to our SysAdmin group. The problem
is that the MMC tool won't let me report on the drive that I need since
it's a cluster node.

I get the dialog:
Selected report scope paths: D:\.

You have chosen an invalid combination of paths for the report scope. On
clustered deployments, all report scope paths should be set on volumes
that belong to the same cluster resource group. Please select valid
report scope paths.

As I am relatively new to doing Windows Clustering (this was my 1st one
actually), either I'm missing something in the terminology or some
configuration setting that I overlooked needs to be set.

I'm hoping someone can guide me to the answer.

Thanks in advance,
Paul L.




.

Relevant Pages

  • Re: Win2k3 R2 - Storage Reporting on File Svr Cluster (SCSI-Attach
    ... to generate reports on shared disks for which a cluster disk resource ... This is an IBM EXP400 disk array and the ipsha.dll from IBM is loaded. ... online that you want to report on. ... all report scope paths should be set on volumes ...
    (microsoft.public.windows.server.clustering)
  • Re: Win2k3 R2 - Storage Reporting on File Svr Cluster (SCSI-Attached)
    ... To use Storage Resource Manager in R2 you will need a VDS Provider from your ... I've recently set up a 2-node file server cluster under Windows 2003 Ent. ... Report Management and send out reports to our SysAdmin group. ... all report scope paths should be set on volumes ...
    (microsoft.public.windows.server.clustering)
  • Re: Win2k3 R2 - Storage Reporting on File Svr Cluster (SCSI-Attach
    ... Microsoft resource drivers did not see the shared disk/logical volumes and I ... Installing Cluster Service using ServeRAID controller for Microsoft Windows ... online that you want to report on. ...
    (microsoft.public.windows.server.clustering)
  • Re: Win2k3 R2 - Storage Reporting on File Svr Cluster (SCSI-Attach
    ... the logical volumes attached through the IBM IPSHA resource driver." ... The 2 servers in the cluster that I set up under 2003 R2 were set up ... online that you want to report on. ...
    (microsoft.public.windows.server.clustering)
  • Re: Win2k3 R2 - Storage Reporting on File Svr Cluster (SCSI-Attach
    ... adapters and create the shared disk fine, but the native MS disk resource ... to generate reports on shared disks for which a cluster disk resource ... i get the error that it's on a cluster server. ... online that you want to report on. ...
    (microsoft.public.windows.server.clustering)
Loading