Re: Error Message - Fiber Channel SAN
- From: "Ryan Sokolowski [MVP]" <ryan@xxxxxxxxxxxxxx>
- Date: Tue, 3 Jan 2006 13:23:35 -0800
You should be able to properly configure this using a single HBA per cluster
node (although I'd strongly recommend multiple HBAs). Ensure you are using
the latest Xiotech/QLogic-approved STORPort HBA driver. This is critical
for supporting boot-from-SAN with simultaneous SAN volume access...
--
Ryan Sokolowski
MVP - Windows Server - Clustering
MCSE, CCNA, CCDA, BCFP
"A troubleshooter's best tool is the Event Viewer and understanding the
events and messages contained therein."
This posting is provided "AS IS" with no warranties, and confers no rights.
"Les Arrowman" <LesArrowman@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:7EDD7462-9C51-4B43-BD2E-F81DB275517B@xxxxxxxxxxxxxxxx
> Here's the error we're getting:
> 2006-01-03 12:38:48.484 [INFO] cls1: The physical disk "Disk Q:" cannot be
> managed because it is on the same storage bus as the boot disk.
> (hr=00000000,
> {13E84779-125E-4B76-8C0D-1F5DB92EFE0F},
> {F09AB703-F55A-4C53-889D-AC457F1AE7F7}, 1, 1, 1), The cluster cannot
> manage
> physical disks that are on the same storage bus as the volume that
> contains
> the operating system because other nodes connected to the storage bus
> cannot
> distinguish between these volumes and volumes used for data.
>
> I've been told that the Xiotech SAN we use along with the QLogic 2340
> cards
> we're using are supposed to support booting and accessing the cluster on
> the
> same HBA is this possible? Everything I've seen says you need two HBA's to
> boot off of a SAN and access a cluster disk on the SAN.
.
- Prev by Date: Re: Print shares don't show on secondary node
- Next by Date: Re: Change just the Heartbeat IP address for Windows 2003 Cluster
- Previous by thread: Re: Print shares don't show on secondary node
- Next by thread: Re: Error Message - Fiber Channel SAN
- Index(es):
Relevant Pages
|
