Re: Cluster IP address resource could not create required TCP/IP

Is there a specific component under DCOM that should be active? I can
compare from node A to node B but is there a specific entry that I should
focus on?
Thanks.

"Chuck Timon [MSFT]" wrote:

> You need to ensure DCOM is enabled on the server.
>
> --
> Chuck Timon, Jr.
> Microsoft Corporation
> CCS Beta Engineer
> This posting is provided "AS IS" with no
> warranties, and confers no rights.
> "PaulSe" <PaulSe@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:A0FD1C78-A68D-47E2-B5E1-DEB52A302C45@xxxxxxxxxxxxxxxx
> > We have a Windows Server 2003 EE cluster and we are receiving event 1045
> > and
> > event 1069 when we try to move any IP address resource from the 'A' node
> > to
> > the 'B' node.
> > --------------------------------------------------------------------------------------------
> > Event Type: Error
> > Event Source: ClusSvc
> > Event Category: IP Address Resource
> > Event ID: 1045
> > Date: 10/13/2005
> > Time: 2:34:45 PM
> > User: N/A
> > Computer: HOSTB
> > Description:
> > Cluster IP Address resource 'xxx IP' could not create the required TCP/IP
> > interface.
> >
> > For more information, see Help and Support Center at
> > http://go.microsoft.com/fwlink/events.asp.
> > Data:
> > 0000: 05 00 07 80
> >
> > ---------------------------------------------------------------------------------------------
> > We have confirmed that IP connectivity from the B node and that the
> > netmask
> > on the IP resource and the IP adapter are the same. Heartbeat is on a
> > separate subnet and is working properly. We have tried resetting IP using
> > 'netsh' and installed the latest NIC drivers. We increased logging level
> > for
> > cluster.log to 3 and the following messages are listed:
> >
> > 00000814.00000b40::2005/10/13-18:34:45.115 ERR [ClNet]
> > INetConnectionManager_EnumConnections failed, status 80070005
> > 00000814.00000b40::2005/10/13-18:34:45.115 ERR IP Address <xxx IP>:
> > Unable
> > to create new IP interface, status 2147942405
> > 00000814.00000b40::2005/10/13-18:34:45.115 ERR IP Address <xxx IP>:
> > Failed
> > to created new IP interface, status 2147942405.
> >
> > Found a similar post in this forum from August 2005, but there was no
> > resolution listed. We've reviewed KB811876 and it does not appear to
> > apply.
> > Any thoughts?
>
>
>
.

Relevant Pages

  • Re: MS DTC and DCOM
    ... Additionally, as I understand it, Microsoft will only support the MSDTC ... Component Services snap-in without having a clustered MSDTC resource ... the registry to see if DCOM is enabled or not. ... Transaction Coordinator' resource to one of the cluster groups, ...
    (microsoft.public.windows.server.clustering)
  • Re: MS DTC and DCOM
    ... Component Services snap-in without having a clustered MSDTC resource online ... the registry to see if DCOM is enabled or not. ... Is MSDTC needed to enable DCOM? ... Active Passive cluster. ...
    (microsoft.public.windows.server.clustering)
  • [RFC] Revised CKRM release
    ... The Class-based Resource Management project is happy to release the ... A filesystem-based user interface, proposed by Rik van Riel, to ... useful for controlling groups of sockets. ... Resource controllers are now explicitly associated with a ...
    (Linux-Kernel)
  • Newbie trying to setup the Ethernet Connection...
    ... I work for a small software company and we just purchased our first IBM ... Ethernet Port listed as Resource CMN03, Type 2838, Stauts Operational, ... Above this in the list was resource LIN02 ... Associated Local Interface: *NONE ...
    (comp.sys.ibm.as400.misc)
  • Re: [Lse-tech] [PATCH] cpusets - big numa cpu and memory placement
    ... > Cpusets are a complex resource which needs to be managed. ... I really don't care too much about the interface as long ... > separate resource controllers, the really acceptable end result would ...
    (Linux-Kernel)