RE: Lexmark Duplex problem

I am having the same problem. I have narrowed it down to all of the drivers
in the lexmark driver pack. Currently have a support call open with lexmark.

"Mike Rosado [MSFT]" wrote:

> Hi Eric,
>
> So have you tested these drivers on a stand-alone sever? If not, can you
> test on a stand-alone server? Do you experience the same behavior? What
> does Lexmark have to say about the behavior you're experiencing?
>
> Have you tried going to the Properties of the driver and on the Advanced
> tab, then click on Print Processor and make sure you're using WinPrint as
> the Print Processor and RAW as the Default data type?
>
> --------------------
> Hope this helps,
> Mike Rosado
> Windows 2000 MCSE + MCDBA
> Microsoft Enterprise Platform Support
> Windows NT/2000/2003 Cluster Technologies
>
> ====================================================
> When responding to posts, please "Reply to Group" via your newsreader so
> that others may learn and benefit from your issue.
> ====================================================
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
> <http://www.microsoft.com/info/cpyright.htm>
>
> -----Original Message-----
> > From: <Eric N@xxxxxxxxxxxxxxxxxxxxxxxxx>
> > Subject: Lexmark Duplex problem
> > Date: Mon, 9 May 2005 16:03:36 -0700
> >
> > The problem is, that anytime the print resources go offline or fail from
> one
> > node to another, I loose my duplex option and 250 *** tray option from
> the
> > Device tab in the print queue properties. I have no problems with my HP
> > printers. The best part is that this is one of the only printer drivers
> that
> > is not digitally signed by Microsoft. Any ideas on how to fix this?
> >
> > The system
> > Two Compaq DL380 G2 servers
> > Windows 2003 Enterprise, Active/Pasive
> > One resource group for print services
> > One Quorum group
> > 200 Lexmark T520 print queues
> > 200 misc. HP printers, mostly LJ 4000
> > Print drivers for the Lexmark printers are the most current, at ver. 7.4.1
> > Using standard TCP/IP printer ports
> >
> > Thanks for the help
> >
>
>
.