Re: windows 2003 NLB

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Parameshwar (Parameshwar_at_discussions.microsoft.com)
Date: 09/09/04 

Date: Thu, 9 Sep 2004 09:47:07 -0700

Thanks for your respnse.
But I have setup the same environment at my HQ office on the same subnet.
However I was using a managed layer 2 gigabit swtich and the network had
several subnets, but as I said earlier I set up the local IPs and the cluster
IP on the same subnet. Any ideas/suggestions will be greatly appreciated.

Thanks once again,
Parameshwar

"Russ Kaufmann [MCT]" wrote:

> "Parameshwar" <Parameshwar@discussions.microsoft.com> wrote in message
> news:9BC04DBC-7940-402A-8B18-61452AFD6008@microsoft.com...
> >I am trying to use NLB for Sharepoint Portal Server 2003.
> >
> > I have setup 2 windows 2003 Std. Ed. with 2 NICs on each (One for local IP
> > interface and the other for Cluster (virtual IP)).
> >
> > Server1 NIC1 - 10.10.1.2
> > 255.255.255.0
> > Server2 NIC2 - 10.10.1.3
> > 255.255.255.0
> >
> > Server1 NIC2 - 10.10.1.4 (cluster IP)
> > 255.255.255.0
> > NLB is enalbed with the cluster IP as the above and dedicated IP:
> > 10.10.1.2(priority 1)
> >
> > Server2 NIC2 - 10.10.1.4 (cluster IP)
> > 255.255.255.0
> > NLB is enalbed with the cluster IP as the above and dedicated IP:
> > 10.10.1.3 (priority 2)
>
> You need to put the heartbeat NIC on a separate subnet. That should help
> resolve the problem.
>
> You might want to refer to this article on configuring NLB
> http://support.microsoft.com/default.aspx?scid=kb;EN-US;240997
>
>
>

Relevant Pages

  • firewall-1 NG NAt/local.arp/arp question
    ... environment with 3 pcs, 1 pc each on a different subnet and one as the ... automatic static NAT with an address of 192.168.253.126. ... why you can't use the NT arp command to add a static entry (at least thats ...
    (comp.security.firewalls)
  • firewall-1 NG NAt/local.arp/arp question
    ... environment with 3 pcs, 1 pc each on a different subnet and one as the ... automatic static NAT with an address of 192.168.253.126. ... why you can't use the NT arp command to add a static entry (at least thats ...
    (comp.security.firewalls)
  • Creating a Single-IP Site for Disaster Recovery
    ... slower frequency than the rest of the DC's, ... the environment, ... want this server to push any of its data, ... Also, this DR DC would be on the same subnet as other servers, and the ...
    (microsoft.public.windows.server.active_directory)
  • Error in OSDInstallWizard
    ... <![LOG[Local user may specify image ... <![LOG[No AD site set in the environment. ... <![LOG[Comparing DP subnet 10.103.22.0 to local machine subnet ... <![LOG[The operating system installation failed. ...
    (microsoft.public.sms.tools)
  • Migrating AD (Windows Server 2003) from one Subnet to Another
    ... I have an existing Windows Server 2003 Active Directory environment, ... network with the IP address configuration 10.0.200.0/24 and this subnet is ... defined within the AD and both of the servers have IP addresses within this ... I now need to migrate this environment from the 10.0.200.0/24 network to the ...
    (microsoft.public.windows.server.networking)