Re: Trust windows 2k to windows 2k3

Thanks, I have installed WINS on our DC and one in the remote DC and set them as replication partners, should this be enough to get it working? I guess I will also have to set every PC to also use this WINS server via DHCP?

Thanks




"Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message news:6cb2911d6cd68cc1171de1a7f19@xxxxxxxxxxxxxxxxxxxxxxx
Hello Gonzo,

Browsing over subnets requires a WINS server, that's correct.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

We don't use WINs eith (forgot to mention), is this something we
should need for my network places to work aswell?

"Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message
news:6cb2911d6ccf8cc116f1c4ec4a0@xxxxxxxxxxxxxxxxxxxxxxx

Hello Gonzo,

Having the trust running is the first step. Then you have configure
access to the ressources as for the domain users. See here for more
details:
http://technet.microsoft.com/en-us/library/cc772808(WS.10).aspx

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
Many thanks!

The Trust is now working fine and I can browse to servers once I put
in the AD creditials. The next problem I face is if I go on to one
of our server and then to "My Network Places" and slect this remote
domain it takes it's time then fails and says "domain is not
available. You might not have permission to this network resource
etc..."

Do I need to add my account to the remote domain somewhere?

Thanks

"Paul Bergson [MVP-DS]" <pbbergs@xxxxxxxxxxxxxx> wrote in message
news:uf7pmCrQKHA.4428@xxxxxxxxxxxxxxxxxxxxxxx

I have an article on how to do this, but for some reason my website
is down. I don't have access to the hardware until this evening.
Check out

http://www.pbbergs.com/windows/windows.htm
Under articles for a forest trust tomorrow or late this evening.
It
will
walk you through step by step. There are some issues with WINS
registration, etc... that can trip you up.
--
Paul Bergson
MVP - Directory Services
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, 2003, 2000 (Early Achiever), NT4
Microsoft's Thrive IT Pro of the Month - June 2009
http://www.pbbergs.com
Please no e-mails, any questions should be posted in the NewsGroup
This posting is provided "AS IS" with no warranties, and confers no
rights.

"Gonzo" <andrewwhite@xxxxxxxxxxxxxx> wrote in message
news:OQ8uHsqQKHA.352@xxxxxxxxxxxxxxxxxxxxxxx

Thanks for those useful links. However I still get the same issue
and we don't have a firewall inbetween.

What does it look for to find a DC?

"Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message
news:6cb2911d6bac8cc10ce850ddf6f@xxxxxxxxxxxxxxxxxxxxxxx

Hello Gonzo,

See here about:
http://technet.microsoft.com/en-us/library/cc782142(WS.10).aspx
http://technet.microsoft.com/en-us/library/cc754941.aspx

Any firewall running:
http://support.microsoft.com/kb/179442/
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties,
and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!!
http://www.blakjak.demon.co.uk/mul_crss.htm
Thanks for finding the time to help.

How would I create a conditional forwarder?

So far I have created a secondary zone on either side and
created a trust, it seems to validate outbound from my Windows
2003 domain but when I conenct to the Windows 2000 DC and
validate it says "windows cannot find a domain controller for
domain. Varify that a DC is available"

There are 3 DC either side, and all appear in DNS, what am I
doing wrong?

"Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in
message news:6cb2911d6b828cc10c889e990b4@xxxxxxxxxxxxxxxxxxxxxxx

Hello Gonzo,

On the 2000 create a secondary zone, correct, on the 2003 you
can use either secondaries, conditional forwarders or stub
zones.

http://technet.microsoft.com/en-us/library/bb727050.aspx

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no
warranties,
and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!!
http://www.blakjak.demon.co.uk/mul_crss.htm
Hi,

Does anyone know where I can find documentation on how to set
up a trust between a Windows 2000 mixed mode domain to a
Windows 2003 native domain? I have been searching for a while
and failed. I used to have a link which was a step by step
guide showing how to setup the DNS on both sides first etc,
which I think was just creating secondary zones point to each
others zones.




.

Relevant Pages

  • Re: Trust windows 2k to windows 2k3
    ... It is available now and it appears you and Meinolf has resolved your issue. ... Under articles for a forest trust tomorrow or late this evening. ... when I conenct to the Windows 2000 DC and validate it says "windows ... On the 2000 create a secondary zone, correct, on the 2003 you can use ...
    (microsoft.public.windows.server.active_directory)
  • Re: Trust windows 2k to windows 2k3
    ... The Trust is now working fine and I can browse to servers once I put in the AD creditials. ... when I conenct to the Windows 2000 DC and validate it says "windows ... On the 2000 create a secondary zone, correct, on the 2003 you can use ...
    (microsoft.public.windows.server.active_directory)
  • RE: Prompt for Credentials during trust NT4 -> Server 2003
    ... try establishing the trust using netdom (netdom trust ... LanMan Workstation on the Server 2K3 domain end, rebooted the 2k3 DC and the ... Trust between a Windows NT domain and an Active Directory domain ... > able to update your profile and access the the partner newsgroups. ...
    (microsoft.public.windows.server.general)
  • Re: Trust windows 2k to windows 2k3
    ... We don't use WINs eith, is this something we should need for my network places to work aswell? ... Having the trust running is the first step. ... So far I have created a secondary zone on either side and created ... it seems to validate outbound from my Windows 2003 domain ...
    (microsoft.public.windows.server.active_directory)
  • RE: Prompt for Credentials during trust NT4 -> Server 2003
    ... Trust between a Windows NT domain and an Active Directory domain ... Domain and Forest Trust Tools and Settings ... This secure code will be valid for 6 months ... able to update your profile and access the the partner newsgroups. ...
    (microsoft.public.windows.server.general)
Quantcast