Re: RENDOM /end fails

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

I don't seem to have a netlogon.dnb or .dns... I only have the DLL.

"Ace Fekay [Microsoft Certified Trainer]" wrote:

In news:6C3DDB23-9873-4B76-94F7-EA3BDE737FE8@xxxxxxxxxxxxx,
bytenik <bytenik@xxxxxxxxxxxxxxxxxxxxxxxxx> requesting assistance, typed the
following:
Unfortunately, the domain controller failed during the rename! This
was a very unlucky situation.

The DC is getting the following errors:
Application:

Source: Userenv; ID: 1006
Windows cannot bind to wtg.com domain. (Local Error). Group Policy
processing aborted.

Source: Userenv; ID: 1030
Windows cannot query for the list of Group Policy objects. Check the
event log for possible messages previously logged by the policy
engine that describes the reason for this.

System:

Source: Netlogon; ID: 5774
The dynamic registration of the DNS record
'_kerberos._tcp.Moonachie._sites.wtg.com. 600 IN SRV 0 100 88
WTGDC01.centralholidays.com.' failed on the following DNS server:

DNS server IP address: 154.15.251.166
Returned Response Code (RCODE): 5
Returned Status Code: 9017

I'm not sure where that DNS server IP is coming from. Its not one of
ours. Additionally, its still trying to register to wtg.com. I'm not
sure why.


Hmm, where did that come from? (Asking myself out loud). That thing
resolves to a DNS server in Germany:
Name: pri1.dns.psinet.de
Address: 154.15.251.166

Also, by changes, does that IP show up in any of the zone properties,
Nameservers tab? If so, delete it.

Did you change the Primary DNS Suffix on the machine to centralholidays.com?

I believe the reason why it is trying to register into that zone is because
the wtg.com zone belongs to someone in Germany and the zone no longer exists
on your DNS. Take a look at this nameserver lookup:

wtg.com
Non-authoritative answer:
wtg.com nameserver = pri1.dns.psinet.de
wtg.com nameserver = pri2.dns.psinet.de
wtg.com nameserver = pri3.dns.psinet.de

pri1.dns.psinet.de internet address = 154.15.251.166
pri2.dns.psinet.de internet address = 154.15.251.170
pri3.dns.psinet.de internet address = 154.15.251.174


If you don't have a forwarder configured, please configure one to 4.2.2.2.

Also, I would like you to run these steps to possibly clean it up:
1. Rename c:\windows\system32\Netlogon.dnb and Netlogon.dns to .dns.old and
..dnb.old
2. Delete Netlogon.dnb and Netlogon.dns on the same machine
3. Reboot Computer
4. Check system log for any errors

Ace




.

Relevant Pages

  • Re: Nameserver
    ... The local zone and the zone for my internal network. ... If I am running a nameserver locally, ... >>gateway for Internet traffic so, I am using my provider's nameservers as ... Or you can read the DNS HOWTO at The Linux Documentation Project ...
    (RedHat)
  • Re: NetBios and DNS
    ... I have the PC's configured with the internal DNS server and I have internet ... How I did this NSLookup was like this. ... If you have a zone for your "domain name" and you add the computer records ...
    (microsoft.public.windows.server.dns)
  • Re: Split Brain DNS setup
    ... the WWW and FTP record should point to the internal IP to prevent a loop ... external DNS server should they also be recreated in the Local DNS server ... >> zone but I'm not sure why and what records would I then need to add ... >> DNS server or to the internet? ...
    (microsoft.public.win2000.dns)
  • RE: NT migration
    ... The domain "domain.com" is not visible in the internet so I dont see why I ... If I create a new zone in the DNS "domain.com" I will have errors in the ... "James Yeomans BSc, MCSE" wrote: ... domain.com on your new dns server and add the mail record there. ...
    (microsoft.public.windows.server.dns)
  • Re: OWA working outside of network but not inside...sort of.
    ... Do I need to create a new zone and add the host or could I just create the new host record under the same zone? ... Not knowing your total setup, I am assuming you have 2 sets of DNS servers, one for your active directory inside your firewall and one public on the internet that is the authoritive nameserver for your mydomain.com, is this correct? ... What I am suggesting is to use your internal AD DNS server and create a zone on it mydomain.com this DNS server I am assuming is used by your internal clients to resolve ip address, ...
    (microsoft.public.exchange.admin)