Re: RENDOM /end fails

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

In news:6C3DDB23-9873-4B76-94F7-EA3BDE737FE8@xxxxxxxxxxxxx,
bytenik <bytenik@xxxxxxxxxxxxxxxxxxxxxxxxx> requesting assistance, typed the following:
Unfortunately, the domain controller failed during the rename! This
was a very unlucky situation.

The DC is getting the following errors:
Application:

Source: Userenv; ID: 1006
Windows cannot bind to wtg.com domain. (Local Error). Group Policy
processing aborted.

Source: Userenv; ID: 1030
Windows cannot query for the list of Group Policy objects. Check the
event log for possible messages previously logged by the policy
engine that describes the reason for this.

System:

Source: Netlogon; ID: 5774
The dynamic registration of the DNS record
'_kerberos._tcp.Moonachie._sites.wtg.com. 600 IN SRV 0 100 88
WTGDC01.centralholidays.com.' failed on the following DNS server:

DNS server IP address: 154.15.251.166
Returned Response Code (RCODE): 5
Returned Status Code: 9017

I'm not sure where that DNS server IP is coming from. Its not one of
ours. Additionally, its still trying to register to wtg.com. I'm not
sure why.


Hmm, where did that come from? (Asking myself out loud). That thing resolves to a DNS server in Germany:
Name: pri1.dns.psinet.de
Address: 154.15.251.166

Also, by changes, does that IP show up in any of the zone properties, Nameservers tab? If so, delete it.

Did you change the Primary DNS Suffix on the machine to centralholidays.com?

I believe the reason why it is trying to register into that zone is because the wtg.com zone belongs to someone in Germany and the zone no longer exists on your DNS. Take a look at this nameserver lookup:

wtg.com
Non-authoritative answer:
wtg.com nameserver = pri1.dns.psinet.de
wtg.com nameserver = pri2.dns.psinet.de
wtg.com nameserver = pri3.dns.psinet.de

pri1.dns.psinet.de internet address = 154.15.251.166
pri2.dns.psinet.de internet address = 154.15.251.170
pri3.dns.psinet.de internet address = 154.15.251.174


If you don't have a forwarder configured, please configure one to 4.2.2.2.

Also, I would like you to run these steps to possibly clean it up:
1. Rename c:\windows\system32\Netlogon.dnb and Netlogon.dns to .dns.old and ..dnb.old
2. Delete Netlogon.dnb and Netlogon.dns on the same machine
3. Reboot Computer
4. Check system log for any errors

Ace



.

Relevant Pages

  • Re: Configure the DNS Server
    ... On the Apac.domain.com DNS server - that same zone says it is a secondary domain. ... For a correct answer I need to know, are both of these DCs for the same ... Under Windows 2000 AD Integrated zones will only replicate to DCs within the ...
    (microsoft.public.win2000.dns)
  • Re: Novell Netware 5.1 DNS migration
    ... secondary zone transfer mechanism. ... one changes the zones so that the SOA defines the Windows ... DNS server as the primary and establish secondary transfer ... > Hello friends, our network is basically a Netware shop, but we also have ...
    (microsoft.public.windows.server.dns)
  • AD and DNS errors
    ... Our organization currently manages 3 Windows domains - all being domain ... DNS servers and create the forest and domain as sub-domains under our parent ... and we added the namespace as an AD-integrated zone on our Windows DNS ... DNS server on the machine. ...
    (microsoft.public.windows.server.general)
  • RE: DCPromo Does Not Transfer Zone
    ... A DNS zone transfer between a BIND DNS server and a Windows Server ...
    (microsoft.public.windows.server.migration)
  • Re: Event 5774 /DNS errors/Latest updates
    ... 82540EM Based Network Conne ... Zone DOES NOT allow dynamic updates. ... Windows 2000 server SP 4 is the OS. ... >> DNS server unable to interpret format. ...
    (microsoft.public.win2000.dns)