Re: ADPrep /forestprep failed 2000 to 2003 r2
- From: Kelly <speedy841@xxxxxxxxxxxxxxxx>
- Date: Mon, 15 Sep 2008 13:10:19 -0700
Here is the output of the "schupgr" command. This is the only DC on my
network at the time I ran this.
C:\WINNT\system32>schupgr
Opened Connection to CRDI-AD
SSPI Bind succeeded
Current Schema Version is 31
Upgrading schema to version 31
Schema has already been changed in another DC in this enterprise and the
changes
are made to this DC. Rerun setup to upgrade this DC
What rerun setup is it talking about? DCPROMO?
Meinolf Weber <meiweb(nospam)@gmx.de> wrote in
news:ff16fb66673b8cae16336789d52@xxxxxxxxxxxxxxxxxxxx:
Hello Kelly,a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=crdius
Have also a look on this one:
http://technet.microsoft.com/en-us/library/cc773360.aspx
Additional post the output from "schupgr" from the command prompt on
the 2000 DC.
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
I'm running the 32bit version off of the 32bit cd. I've already
loaded the 64bit on the new server, just need to get this old box up
to 2003 so that I can move it to the new server.
Meinolf Weber <meiweb(nospam)@gmx.de> wrote in
news:ff16fb665f788cadcbacf802f11@xxxxxxxxxxxxxxxxxxxx:
Hello Kelly,
So which adprep version from the R2 disk do you run, 32bit or 64bit?
Because 2000 is 32bit it has to be the 2003 32bit version.
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
Meinolf Weber <meiweb(nospam)@gmx.de> wrote in
news:ff16fb665f588cadcb4ee98a0a0@xxxxxxxxxxxxxxxxxxxx:
Hello Kelly,
Do you have 2003 64bit version or 32bit? Which SP is installed on
the 2000 DC?
Also check that Schema Updates are enabled:
1. At a command prompt, type:
regsvr32 schmmgmt.dll
NOTE: RegSvr32 has been successfully registered when a
DllRegisterServer in schmmgmt.dll succeeded dialog box is
displayed.
2. Open a new management console by clicking Start, click Run, and
then type:
MMC
3. On the Console menu, click Add/Remove Snap-in.
4. Click Add to open the Add Standalone Snap-in dialog box.
5. Click Active Directory Schema, and then click Add.
6. "Active Directory Schema" is displayed in the Add/Remove
snap-in.
Click Close, and then click OK to return to the console.
7. Click Active Directory Schema so that the Classes and
Attributes sections are displayed on the right-hand side.
8. Right-click Active Directory Schema and click Operations
Master. 9. Click to select the Schema may be modified on this
Domain Controller check box. Click OK, and then exit the console.
The schema may now be updated on the domain controller that holds
the schema operations master role.
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties,
and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
Meinolf Weber <meiweb(nospam)@gmx.de> wrote in
news:ff16fb665eb88cadc8214d6cae5@xxxxxxxxxxxxxxxxxxxx:
Hello Kelly,
Make sure you run the adprep command with an account that is
member of the schema administrators on the schema master itself.
Also make sure that you can write to the schema. Please post the
output from this command "netdom query fsmo" without the qoutes
from the command prompt. If the netdom command is not found
install the tools/support/suptools.msi from the 2000
installation disk.
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties,
and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!!
http://www.blakjak.demon.co.uk/mul_crss.htm
I'm running ADPrep on my 2000 DC and I get almost complete and
I get an error.
Here is a copy of error part in the ADPrep.log file.
Adprep checked to verify whether operation
cn=26ad2ebf-f8f5-44a4-b97c-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=xxxx,D
,D C=local has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to
rerun this operation but is continuing.
Adprep was about to call the following LDAP API.
ldap_search_s(). The base entry to start the search is
cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=xxxx,D
C= local.
LDAP API ldap_search_s() finished, return code is 0x20
Adprep verified the state of operation
cn=4444c516-f43a-4c12-9c4b-
Meinolf,MeinolfC= local.
[Status/Consequence]
The operation has not run or is not currently running. It will
be run next.
Adprep was unable to complete because the call back function
(null) failed.
[Status/Consequence]
Error message: Error(110) while running ""C:\WINNT\system32
\LDIFde.exe" -o ObjectGuid -d
"CN=pKICertificateTemplate-Display,CN=
404,CN=DisplaySpecifiers,CN=Configuration,DC=xxxx,DC=local" -u
-f
"C:
\DOCUME~1\ADMINI~1.000\LOCALS~1\Temp\TMPAA.tmp" -j
"C:\WINNT\system32
\debug\adprep\logs\20080903150106" -s crdi-ad.xxxx.local".
Could not move file
C:\WINNT\system32\debug\adprep\logs\20080903150106\LDIF.err
to
C:\WINNT\system32\debug\adprep\logs\20080903150106
\DisplaySpecifierUpgradeLdifError.001.txt. The system cannot
find
the
file specified.
(0x80070002).
[User Action]
Check the log file Adprep.log, in the
C:\WINNT\system32\debug\adprep \logs\20080903150106 directory
for
more information.
Adprep set the value of registry key
System\CurrentControlSet\Services \NTDS\Parameters\Schema
Update Allowed to 1
Adprep was unable to update forest-wide information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from
the schema master in order to complete this operation.
[User Action]
Check the log file, Adprep.log, in the
C:\WINNT\system32\debug\adprep \logs\20080903150106 directory
for more information.
Any help on this error would be great.
Here is a copy of the netdom query like you asked for.
C:\Program Files\Support Tools>netdom query fsmo
Schema owner crdi-ad.xxxx.local
Domain role owner crdi-ad.xxxx.local
PDC role crdi-ad.xxxx.local
RID pool manager crdi-ad.xxxx.local
Infrastructure owner crdi-ad.xxxx.local
The command completed successfully.
C:\Program Files\Support Tools>
All of the FSMO roles are currently on the same DC. I'm also
logged in as the Administrator which is a member of all the
needed groups.
Kelly
On the 2000 DC I'm running SP4 with current updates also. The 2003
box will be an 64bit but the 2000 is just a 32bit. I can setup a
2003 in 32bit if I need to. Rightnow I'm still working on just
getting the 2000 AD updated. I've just checked the Schema and I do
have the box checked to allow updates.
Kelly
.
- Follow-Ups:
- Re: ADPrep /forestprep failed 2000 to 2003 r2
- From: Meinolf Weber
- Re: ADPrep /forestprep failed 2000 to 2003 r2
- From: Kelly
- Re: ADPrep /forestprep failed 2000 to 2003 r2
- References:
- Re: ADPrep /forestprep failed 2000 to 2003 r2
- From: Kelly
- Re: ADPrep /forestprep failed 2000 to 2003 r2
- From: Meinolf Weber
- Re: ADPrep /forestprep failed 2000 to 2003 r2
- Prev by Date: Re: promote 64bit member server to DC
- Next by Date: W2K Cannot Seize RID and Schema roles
- Previous by thread: Re: ADPrep /forestprep failed 2000 to 2003 r2
- Next by thread: Re: ADPrep /forestprep failed 2000 to 2003 r2
- Index(es):
Relevant Pages
|
Loading
