Re: ADPrep /forestprep failed 2000 to 2003 r2

Hello Kelly,

Have also a look on this one:
http://technet.microsoft.com/en-us/library/cc773360.aspx

Additional post the output from "schupgr" from the command prompt on the 2000 DC.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


I'm running the 32bit version off of the 32bit cd. I've already
loaded the 64bit on the new server, just need to get this old box up
to 2003 so that I can move it to the new server.

Meinolf Weber <meiweb(nospam)@gmx.de> wrote in
news:ff16fb665f788cadcbacf802f11@xxxxxxxxxxxxxxxxxxxx:
Hello Kelly,

So which adprep version from the R2 disk do you run, 32bit or 64bit?
Because 2000 is 32bit it has to be the 2003 32bit version.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
Meinolf Weber <meiweb(nospam)@gmx.de> wrote in
news:ff16fb665f588cadcb4ee98a0a0@xxxxxxxxxxxxxxxxxxxx:
Hello Kelly,

Do you have 2003 64bit version or 32bit? Which SP is installed on
the 2000 DC?

Also check that Schema Updates are enabled:
1. At a command prompt, type:
regsvr32 schmmgmt.dll
NOTE: RegSvr32 has been successfully registered when a
DllRegisterServer in schmmgmt.dll succeeded dialog box is
displayed.
2. Open a new management console by clicking Start, click Run, and
then type:
MMC
3. On the Console menu, click Add/Remove Snap-in.
4. Click Add to open the Add Standalone Snap-in dialog box.
5. Click Active Directory Schema, and then click Add.
6. "Active Directory Schema" is displayed in the Add/Remove
snap-in.
Click Close, and then click OK to return to the console.
7. Click Active Directory Schema so that the Classes and Attributes
sections are displayed on the right-hand side.
8. Right-click Active Directory Schema and click Operations Master.
9. Click to select the Schema may be modified on this Domain
Controller check box. Click OK, and then exit the console.
The schema may now be updated on the domain controller that holds
the schema operations master role.
Best regards
Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties,
and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
Meinolf Weber <meiweb(nospam)@gmx.de> wrote in
news:ff16fb665eb88cadc8214d6cae5@xxxxxxxxxxxxxxxxxxxx:
Hello Kelly,

Make sure you run the adprep command with an account that is
member of the schema administrators on the schema master itself.
Also make sure that you can write to the schema. Please post the
output from this command "netdom query fsmo" without the qoutes
from the command prompt. If the netdom command is not found
install the tools/support/suptools.msi from the 2000 installation
disk.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties,
and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!!
http://www.blakjak.demon.co.uk/mul_crss.htm
I'm running ADPrep on my 2000 DC and I get almost complete and I
get an error.

Here is a copy of error part in the ADPrep.log file.

Adprep checked to verify whether operation
cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=crdius

,D C=local has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to
rerun this operation but is continuing.

Adprep was about to call the following LDAP API.
ldap_search_s(). The base entry to start the search is
cn=4444c516-f43a-4c12-9c4b-

b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=xxxx,D

C= local.

LDAP API ldap_search_s() finished, return code is 0x20

Adprep verified the state of operation
cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=xxxx,D

C= local.

[Status/Consequence]

The operation has not run or is not currently running. It will
be run next.

Adprep was unable to complete because the call back function
(null) failed.

[Status/Consequence]

Error message: Error(110) while running ""C:\WINNT\system32
\LDIFde.exe" -o ObjectGuid -d
"CN=pKICertificateTemplate-Display,CN=
404,CN=DisplaySpecifiers,CN=Configuration,DC=xxxx,DC=local" -u
-f
"C:
\DOCUME~1\ADMINI~1.000\LOCALS~1\Temp\TMPAA.tmp" -j
"C:\WINNT\system32
\debug\adprep\logs\20080903150106" -s crdi-ad.xxxx.local". Could
not move file
C:\WINNT\system32\debug\adprep\logs\20080903150106\LDIF.err
to
C:\WINNT\system32\debug\adprep\logs\20080903150106
\DisplaySpecifierUpgradeLdifError.001.txt. The system cannot
find
the
file specified.
(0x80070002).
[User Action]
Check the log file Adprep.log, in the
C:\WINNT\system32\debug\adprep \logs\20080903150106 directory
for
more information.
Adprep set the value of registry key
System\CurrentControlSet\Services \NTDS\Parameters\Schema Update
Allowed to 1

Adprep was unable to update forest-wide information.

[Status/Consequence]

Adprep requires access to existing forest-wide information from
the schema master in order to complete this operation.

[User Action]

Check the log file, Adprep.log, in the
C:\WINNT\system32\debug\adprep \logs\20080903150106 directory
for more information.

Any help on this error would be great.

Meinolf

Here is a copy of the netdom query like you asked for.

C:\Program Files\Support Tools>netdom query fsmo
Schema owner crdi-ad.xxxx.local
Domain role owner crdi-ad.xxxx.local
PDC role crdi-ad.xxxx.local
RID pool manager crdi-ad.xxxx.local
Infrastructure owner crdi-ad.xxxx.local
The command completed successfully.
C:\Program Files\Support Tools>
All of the FSMO roles are currently on the same DC. I'm also
logged in as the Administrator which is a member of all the needed
groups.
Kelly

Meinolf,

On the 2000 DC I'm running SP4 with current updates also. The 2003
box will be an 64bit but the 2000 is just a 32bit. I can setup a
2003 in 32bit if I need to. Rightnow I'm still working on just
getting the 2000 AD updated. I've just checked the Schema and I do
have the box checked to allow updates.

Kelly



.

Relevant Pages

  • Re: ADPrep /forestprep failed 2000 to 2003 r2
    ... Here is the output of the "schupgr" command. ... Upgrading schema to version 31 ... So which adprep version from the R2 disk do you run, ... "Active Directory Schema" is displayed in the Add/Remove ...
    (microsoft.public.windows.server.active_directory)
  • Re: ADPrep /forestprep failed 2000 to 2003 r2
    ... ADPREP done. ... Upgrading schema to version 31 ... Additional post the output from "schupgr" from the command prompt on ... "Active Directory Schema" is displayed in the Add/Remove ...
    (microsoft.public.windows.server.active_directory)
  • Re: Error Upgrading Windows 2003 Schema to Windows 2008 Schema
    ... Disclaimer: This posting is provided "AS IS" with no warranties, ... Before running adprep, all Windows 2000 Active Directory Domain ... Upgrading schema to version 44 ...
    (microsoft.public.windows.server.setup)
  • Re: ADPrep /forestprep failed 2000 to 2003 r2
    ... So which adprep version from the R2 disk do you run, ... Click Active Directory Schema, ... Click Active Directory Schema so that the Classes and Attributes ... Make sure you run the adprep command with an account that is ...
    (microsoft.public.windows.server.active_directory)
  • Re: ADPrep /forestprep failed 2000 to 2003 r2
    ... So which adprep version from the R2 disk do you run, ... Click Active Directory Schema, ... Click Active Directory Schema so that the Classes and Attributes ... Make sure you run the adprep command with an account that is member ...
    (microsoft.public.windows.server.active_directory)