Re: ADC replication issues.

If there are errors in the dcdiag, there should be room to post those.
People do that all the time. Let me know if you can't post that

--
Paul Bergson
MVP - Directory Services
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, 2003, 2000 (Early Achiever), NT4

http://www.pbbergs.com

Please no e-mails, any questions should be posted in the NewsGroup
This posting is provided "AS IS" with no warranties, and confers no rights.

"S H A R I Q U E" <SHARIQUE@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:7582D24F-FF8A-4BCE-BD77-02A8B965E3B5@xxxxxxxxxxxxxxxx
Well MAN!!!..it was premature to celebrate accomplishments ...some things
are
waiting for your expert advice!!
By hook or by crook, i managed to install CRM 4.0 and it is working
fine( i
am sure the GUID domain nam FQDN was culprit that time)..but in ADC
eventviewer event ID 1126 is appearing again despite the fact that in
DSSITE.MSC, i dont get any error when i replicate from DC.
Furthermore, on ADC when i type control sysdm.cpl and goes to Computer
Name,
it full computer name is IOPDB only not IOPDB.IOP.NET also ADC eventviewer
registers event id with 414.
Since it is additional domain controller, i cant change its domain name
suffix.
the tasks you recommended me to perform in your previous reply contains
files too verbose to be pasted in this small window...if it is possible
for
you to give me your email address so that i post those file to your email

regards


"Paul Bergson [MVP-DS]" wrote:

glad to help and good work.

--
Paul Bergson
MVP - Directory Services
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, 2003, 2000 (Early Achiever), NT4

http://www.pbbergs.com

Please no e-mails, any questions should be posted in the NewsGroup
This posting is provided "AS IS" with no warranties, and confers no
rights.

"S H A R I Q U E" <SHARIQUE@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:4F6FDEF4-9822-4F29-81C7-9354E0A73A42@xxxxxxxxxxxxxxxx
thanks to Dnslint /ad /s command i have resolved this issue
yesterday.actually in both DNS msdcs section, the GUID was not a
complete
FQDN.it was missing domain name suffix of ADC in both DNS servers.so
modified
both of them..and it worked...now, after that i have managed to install
CRM
4.0 successfully...replication between ADC and DC is working :)

regards




"Paul Bergson [MVP-DS]" wrote:

Alright lets check AD for starters.

un diagnostics against your Active Directory domain.

If you don't have the support tools installed, install them from your
server
install disk.
d:\support\tools\setup.exe

Run dcdiag, netdiag and repadmin in verbose mode.
-> DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log
-> netdiag.exe /v > c:\netdiag.log (On each dc)
-> repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt
-> dnslint /ad /s "ip address of your dc"

**Note: Using the /E switch in dcdiag will run diagnostics against ALL
dc's
in the forest. If you have significant numbers of DC's this test
could
generate significant detail and take a long time. You also want to
take
into account slow links to dc's will also add to the testing time.

If you download a gui script I wrote it should be simple to set and
run
(DCDiag and NetDiag). It also has the option to run individual tests
without having to learn all the switch options. The details will be
output
in notepad text files that pop up automagically.

The script is located on my website at
http://www.pbbergs.com/windows/downloads.htm

Just select both dcdiag and netdiag make sure verbose is set. (Leave
the
default settings for dcdiag as set when selected)

When complete search for fail, error and warning messages.

Description and download for dnslint
http://support.microsoft.com/kb/321045


--
Paul Bergson
MVP - Directory Services
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, 2003, 2000 (Early Achiever), NT4

http://www.pbbergs.com

Please no e-mails, any questions should be posted in the NewsGroup
This posting is provided "AS IS" with no warranties, and confers no
rights.

"S H A R I Q U E" <SHARIQUE@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
news:9A702E11-00AC-4F85-98A7-CC234C9DD843@xxxxxxxxxxxxxxxx
the troubled ADC ip is 192.168.0.1.Its OS is windows 2000 adv sp4.
motivation behind resolving this issue stems from CRM installation
error
on
a separate machine.At first, it might seems to be quite strange that
what
in
the world Do CRM have in common with ADC replication issue.
Well..here
it
is.
During CRM installation issue, i get no error in environmental
diagnostic
wizard.OK...it comes in middle of Installation.the error is.Read
Carefully
since i cant post screenshot here.
"Action Microsoft.Crm.Setup.Server.InstallConfigDatabaseAction
failed.
Unable to obtain DNS hostname of Active Directory domain controller
with
ntdsa object name
"CN=NTDSSettings,CN=IOPDB,CN=Servers,CN=Default-First-Site-Name,CN=Configuration,DC=iop,DC=net"

note that it points to CN=IOPDB which is troubled DC.i dont know how
that
troubled ADC is meddling in CRM installation..after that error the
last
error
pertains to SQL in which it says that CRM databse already
exist.However, i
never created CRM databse before installation..out of this world
suggestion!!!!!!!!!!!!!!!

so...this is the story of troubled ADC...it is hampering
installation
of
CRM
4.0
furthrmore, in dssite.msc i cant replicated from dc and ADC an error
pops
up
that RPC server is unavailable.

"Paul Bergson [MVP-DS]" wrote:

Post the IP Address of the troubled dc.

Has anything recently happened to this dc, like did it crash so you
re-installed it?

--
Paul Bergson
MVP - Directory Services
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, 2003, 2000 (Early Achiever), NT4

http://www.pbbergs.com

Please no e-mails, any questions should be posted in the NewsGroup
This posting is provided "AS IS" with no warranties, and confers no
rights.

"S H A R I Q U E" <SHARIQUE@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
news:4C65DD8B-1AFA-4B72-A9B0-BD39038FB9A0@xxxxxxxxxxxxxxxx
Output of DCDIAG command.


Domain Controller Diagnosis

Performing initial setup:
Done gathering initial info.

Doing initial required tests

Testing server: Default-First-Site-Name\IOPDB
Starting test: Connectivity
3c8258b9-b4b1-47c3-96f4-b9f3855d492d._msdcs.iop.net's
server
GUID
DNS name could not be resolved to an
IP address. Check the DNS server, DHCP, server name, etc
Although the Guid DNS name

(3c8258b9-b4b1-47c3-96f4-b9f3855d492d._msdcs.iop.net)
couldn't
be

resolved, the server name (iopdb) resolved to the IP
address

(192.168.0.1) and was pingable. Check that the IP
address
is

registered correctly with the DNS server.
......................... IOPDB failed test Connectivity

Doing primary tests

Testing server: Default-First-Site-Name\IOPDB
Skipping all tests, because server IOPDB is
not responding to directory service requests

Running enterprise tests on : iop.net
Starting test: Intersite
......................... iop.net passed test Intersite
Starting test: FsmoCheck
......................... iop.net passed test FsmoCheck

regards.


"Florian Frommherz [MVP]" wrote:

Howdie!

S H A R I Q U E schrieb:
ADC registers Event ID 1126 every hour. During netdiag /fix on
ADC,
i
got
following output.
LDAP test. . . . . . . . . . . . . : Failed
[WARNING] The default SPN registration for 'HOST/iopdb' is
missing
on DC
'iopgw.iop.net'.
[WARNING] The default SPN registration for 'HOST/IOPDB' is
missing
on DC
'iopgw.iop.net'.
[WARNING] The default SPN registration for 'HOST/IOPDB' is
missing
on DC
'iopdb'.
[FATAL] The default SPNs are not properly registered on
any
DCs.

That error is not too bad, as far as I know. What does dcdiag
say?
Any
errors in your event log showing why replication doesn't work?

cheers,

Florian
--
Microsoft MVP - Windows Server - Group Policy.
eMail: prename [at] frickelsoft [dot] net.
blog: http://www.frickelsoft.net/blog.
Use a newsreader! http://www.frickelsoft.net/news.html












.

Relevant Pages

  • Re: ADC replication issues.
    ... i managed to install CRM 4.0 and it is working fine(i ... Furthermore, on ADC when i type control sysdm.cpl and goes to Computer Name, ... that RPC server is unavailable. ...
    (microsoft.public.windows.server.active_directory)
  • Re: NTDS Replication Event ID 1083/1955
    ... You can also run the commands only as e.g. dcdiag /v on the DC's one by one. ... On the non-DC DNS server ... there was single instance of an error in the DNS server event log: ... A zone transfer request for the secondary zone ...
    (microsoft.public.windows.server.active_directory)
  • Re: Does DCDiag require WINS?
    ... NetBIOS resolution and THAT requires WINS Server ... DCDiag might conceivable be using NetBIOS to FIND ... all of the DCs but it really SHOULD do this through DNS. ...
    (microsoft.public.windows.server.active_directory)
  • Re: Error while trying to upgrade a Windows 2000 Server domain
    ... If you don't have the support tools installed, install them from your server install disk. ... Run dcdiag, netdiag and repadmin in verbose mode. ... The Windows 2000 DC has Windows Services for Unix v3.0 installed, ...
    (microsoft.public.windows.server.active_directory)
  • Re: Does DCDiag require WINS?
    ... NetBIOS resolution and THAT requires WINS Server ... DCDiag might conceivable be using NetBIOS to FIND ... all of the DCs but it really SHOULD do this through DNS. ...
    (microsoft.public.windows.server.active_directory)
Loading