Re: 2003 R2 SP2 problem (DNS?)
- From: PMK <expat_th-usenet@xxxxxxxx>
- Date: Sat, 21 Apr 2007 21:41:59 +0700
Hi Jeremy,
All settings are default. No, I can't do a net use or even ping to the
DC by name or even IP - net use \\192.168.1.254 /u:administrator fails
with a "System error 1231. The network location cannot be reached". as
does net use \\192.168.1.254. Gives the same error and there is no
password prompt. However, I can ping by IP.
Found this on the net and tried it. The key did not exist on the DC so
I created it, but it did with 0 value on the second server.
HKLM\System\CurrentControlSet\Services\NetBT\Parameters\SMBDeviceEnabled
- Change the value of SMBDeviceEnabled to "1"
BTW, these are virtual machines so it can't be a hardware problem, and
there is nothing out of the ordinary with the virtual network. 2000
Server, etc, works fine.
Thanks,
Peter
On Sat, 21 Apr 2007 21:51:37 +1000, "Jeremy"
<jeremy@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
You wont be able to ping "east" unless the DNS suffix on the machine is.
test.net. Double check the SMB Signing settings on each server to ensure
they are compatible, also check the LMAuthentication level and make sure
they can agree on an authentication protocol.
Can you do a net use to the DC with domain credentials?
i.e. net use \\dc.east.test.net /user:east\administrator
This will prove if both authentication and SMB are working.
Cheers,
Jeremy.
"PMK" <expat_th-usenet@xxxxxxxx> wrote in message
news:vftj23hbkkc30g6k026o3chm26f4hfbv5v@xxxxxxxxxx
Hi,
I've done this countless times on 2000 server but it is not working on
2003 Enterprise Server R2 SP2.
Set up a DC for a new domain, east.test.net, 192.168.1.254 including
DNS server with reverse lookup zone. DCDIAG and NETDIAG don't show any
errors. I can ping east and east.test.net from this DC. Firewall is
off.
Install same software on another server. Firewall off. Join workgroup
(can't join domain). Set DNS server to 192.168.1.254. Can ping
east.test.net but not just the name "east". Error is "Ping request
could not find host east. Please check the name and try again"
Can't join the domain. If I try to join, I do get the name/password
prompt then "The network location could not be reached."
Help would be most appreciated.
Peter
8756c5
- Prev by Date: Re: Synchronizing Computer 'Description' Field with ADUC Description field
- Next by Date: Change local administrator password ? through GPO or push script ?
- Previous by thread: Re: Synchronizing Computer 'Description' Field with ADUC Description field
- Next by thread: Change local administrator password ? through GPO or push script ?
- Index(es):
Relevant Pages
|
