Re: DNS Creation issue on child domain.
- From: Emmanuel Antony <EmmanuelAntony@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 9 Jan 2007 01:49:00 -0800
Hi kevin,
What is the type of zone ur having in place right now for both parent and
child domains?
--
Emmanuel Antony
"Jorge Silva" wrote:
Go to ISA server ngs also have a look at.
http://www.isaserver.org/tutorials/Installing_ISA_Server_on_a_Domain_Controller.html
http://www.isaserver.org/tutorials/2004cannotlogon.html
http://support.microsoft.com/default.aspx?scid=kb;en-us;272294&sd=RMVP
http://support.microsoft.com/default.aspx?scid=kb;en-us;292822&sd=RMVP
http://support.wftx.us/Multihomed_Reg_Fix.txt
--
I hope that the information above helps you.
Have a Nice day.
Jorge Silva
MCSE
"Kevin J" <KevinJ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:34D0BF4C-998C-417F-ABBF-7B9DEC821E9B@xxxxxxxxxxxxxxxx
I do not have a choice as the sites are very remote and 1 server is all
there
is room for.
When I ping the server by name at the server, it resolves to the external
IP
not the internal. Which it should not and I am not sure why.
--
Kevin J
"Jorge Silva" wrote:
ISA Server on domain controller??? Please don’t do that or you'll be very
sorry in near future.
By running ISA on a DC means that your DC is also multihomed DC, which is
a
bad thing and can give lots of name resolution problems, also means that
you
probably are running RRAS in that DC which isn't recommendable, etc...
Take off that ISA FROM YOUR DC, remember if you compromise that DC means
that you’re compromising your entire domain/forest.
Go to MS site and search for multihomed DC, and you'll see lots of issues
related. Also from security prespective this isn't a recomendable
solution.
--
I hope that the information above helps you.
Have a Nice day.
Jorge Silva
MCSE
"Kevin J" <KevinJ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:0008F0F6-D930-4701-8BDE-2D4FB3B084F3@xxxxxxxxxxxxxxxx
DCDIAG is failing the very first test; connectivity.
The Host 2bee70d3-02f......_msdcs.company.local could not be resolved
to
an
IP address.
Although the Giud DNS name couldnt be resolved, the server name
(servername.company.local) resolved to ip address (external IP here)
and
was
pingable.
The server is the only DC on the site as the site is very remote. It
hosts
ISA Server so has an internal and external ethernet port. re the
external
IP
I make note off.
So the dcdiag cannot contact the dc via the internal ip, just the
external.
hmmmm.
--
Kevin J
"Jorge Silva" wrote:
don't forget to run dcdiag and netdiag on the DCs and make sure that
everything is ok.
Also make sure that you have backups in place and at least to DCs per
domain.
--
I hope that the information above helps you.
Have a Nice day.
Jorge Silva
MCSE
"Kevin J" <KevinJ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:D5FB89CC-483E-4CBD-9F31-70C205B05202@xxxxxxxxxxxxxxxx
I was too impatient. The DP that I created in the root domain did
create
successfully.
Now to get the Child domain to create.
--
Kevin J
"Kevin J" wrote:
Jorge,
When I attempt to create a custom DP on the root domain, I get the
same
results. I get a successful response when I execute the create
statement,
but
it never shows up when I enumerate.
--
Kevin J
"Kevin J" wrote:
Thanks Jorge.
I followed the article but was unsuccessful. I created the
partition
and
recieved the
confirmation message of success. However, when I enumerated the
directory
partitions, it was not there. I even tried the create statement
again,
and
was returned with success.
If I try the same statements on another child domain which
appears
to
be
functioning correctly, I get an error when I attempt to create
the
partiton.
DNS_ERROR_DP_FSMO_ERROR 9906.
--
Kevin J
"Jorge Silva" wrote:
Hi
Have a look
http://support.microsoft.com/kb/884116
--
I hope that the information above helps you.
Have a Nice day.
Jorge Silva
MCSE
"Kevin J" <KevinJ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:DE2B24C5-BEE7-433D-9B0B-99F6B7F1DF2B@xxxxxxxxxxxxxxxx
I have created a child domain and I am having big problems
creating
the
Default Application Directory Partition for DNS.
When I attempt to create the ADP for the local domain, I
receive
no
error
through the DNS GUI. But when I attempt to change replication
for
the zone
to
all DNs servers in the active directory domain, I get an
error
telling me
that the specified directory partition does not exist.
The netlogon service logs; Dynamic registration or
deregistration
of one
or
more DNS records failed with the following error:
No DNS servers configured for local system.
--
Kevin J
- Prev by Date: PAC Validation
- Next by Date: RE: adding computer objects to groups controlling access to file s
- Previous by thread: PAC Validation
- Next by thread: RE: adding computer objects to groups controlling access to file s
- Index(es):
Relevant Pages
|
