DC rebuild

Hi,

I had a server crash on a DC last week-end (2 failed drives on the same RAID
5 array, yep this happens) and I have to rebuild it from scratch. I run
Windows 2003 AD in native mode. The server was Windows Server 2003 SP1.
File/print and DC only.

My question: should I clean the AD of all references to this DC and rebuild
it using the same computer name and IP address or would it be better to use
a new name and IP to make sure that there will be no conflict with the old
(dead) DC ?

Thank you.

Pierrot


.

Relevant Pages

  • rebuild problems with ata-raid on array with freebsd native meta
    ... First of all i have a intel se7520jr2 motherboard with SATA RAID ... by creating RAID1 array in LSI Integrated RAID ... but `atacontrol rebuild ar0` always had had ENXIO ...
    (freebsd-current)
  • Re: LSI Logic SATA Raid Restore
    ... The drives are identical. ... AFAIK it is a LSI Logic Raid chip - It's a Fujitsu Siemens Econel 40 Server. ... I did a "rebuild" from the BIOS menu. ... I am assuming that the array is not properly rebuilding and the data is not ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: P5LD2-Deluxe and RAID 1 rebuild...how to stop
    ... >> BIOS) from prompting them to rebuild a RAID 1 aarray t bootup. ... > When the Intel software wants to rebuild the RAID 1 array, ... > disk that is ready is marked as being an "orphan". ...
    (alt.comp.periphs.mainboard.asus)
  • Re: RAID failure - how to rebuild?
    ... The raid firmware will detect & rebuild. ... disk but no where could I repair it. ... has a RAIDcore hardware RAID1 array. ...
    (microsoft.public.windows.server.sbs)
  • Re: Raid 1 mirroring degraded;
    ... When I used onboard raid it was Silicon Image and when the array was being ... When you select the rebuild option does the detail satus change in any way? ... Depending on your disk size a rebuild could take up to 1 hour. ...
    (microsoft.public.windowsxp.help_and_support)
Loading