Re: R2 in-place upgrade bug ? ..HELP

Thanks Jorge.

I don't think i figured everything out. I still can't ping the server from
any workstation in the same subnet.

any workstation outside the subnet, and server, can resolve this box.

The problem is, the traffic may not be relegated to just icmp.


a Dell software enginner mentioned it could be a group policy opbject that
was upgraded from win2k that possibly applies to the "main office" and
enabled the Windows ICF or IPSEC

thoughts on what to do ?

run gpinventory and gpmc reports to verify ?



Jorge Silva wrote:
well glad that you've everything working. As for the TCPIP you should post
that in ngp at Security or Networking, there you can have a better answer.

Jorge -

[quoted text clipped - 193 lines]

Thanks,

--
---
I do what i got to do in order to do what i want to do...

Message posted via http://www.winserverkb.com

.

Relevant Pages

  • RE: Unable to ping client2
    ... I understand that the server box can not ping one ... client workstation after upgraded to SBS 2003 SP1. ... Reboot the SBS Server. ... On the client workstation, run "ipconfig /release" and then run ...
    (microsoft.public.windows.server.sbs)
  • Re: Ping reply through the same interface
    ... You are *not* supposed to have two nics in the same subnet unless they are ... If they are in the same subnet they will not work as you want. ... If the source of the Ping is not in the same subnet as the nic it pinged ... Routes leaving the server are determined by the Destination and how the ...
    (microsoft.public.windows.server.networking)
  • Re: Problems Setting Up a Small Wireless Home Network
    ... >> shared files from the server on the workstation. ... > ping ... Approximate round trip times in milli-seconds: ...
    (microsoft.public.windowsxp.network_web)
  • Re: Weird Network Connectivity Problem
    ... I would immediately replace the cable between the workstation and the wall, and also the one between the patch panel and the switch. ... also have a Terminal Services server and a Unix box. ... ping x199 returns "request timed out". ...
    (microsoft.public.windows.server.sbs)
  • Re: Help!! Web Server outage - ping failure
    ... Ping from workstation: .2 fails, ... secondary IP from the server and get responses. ... the difference in settings between dhcp and setting ip manually. ...
    (microsoft.public.inetserver.iis)