Re: dns server unable to open active directory

Sure.

NetDiag Log:


Computer Name: LS1
DNS Host Name: ls1.logos-system.org
System info : Windows 2000 Server (Build 2195)
Processor : x86 Family 6 Model 11 Stepping 1, GenuineIntel
List of installed hotfixes :
KB820888
KB823182
KB823559
KB824105
KB824141
KB824146
KB825119
KB826232
KB828035
KB828749
KB829558
Q147222
Q816093
Q818043


Netcard queries test . . . . . . . : Passed
[WARNING] The net card 'RAS Async Adapter' may not be working because it
has not received any packets.



Per interface results:

Adapter : Local Area Connection (Trusted)

Netcard queries test . . . : Passed

Host Name. . . . . . . . . : ls1.logos-system.org
IP Address . . . . . . . . : 10.1.1.10
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 10.1.1.5
Primary WINS Server. . . . : 10.1.1.10
Dns Servers. . . . . . . . : 10.1.1.10


AutoConfiguration results. . . . . . : Passed

Default gateway test . . . : Passed

NetBT name test. . . . . . : Passed

WINS service test. . . . . : Passed


Global results:


Domain membership test . . . . . . : Passed


NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{0B5666A5-6C1B-4E35-A59A-303DE059850D}
1 NetBt transport currently configured.


Autonet address test . . . . . . . : Passed


IP loopback ping test. . . . . . . : Passed


Default gateway test . . . . . . . : Passed


NetBT name test. . . . . . . . . . : Passed

*****************************

DCDiag Log:

Domain Controller Diagnosis

Performing initial setup:
Done gathering initial info.

Doing initial required tests

Testing server: LogosSystem\LS1
Starting test: Connectivity
......................... LS1 passed test Connectivity

Doing primary tests

Testing server: LogosSystem\LS1
Starting test: Replications
......................... LS1 passed test Replications
Starting test: NCSecDesc
......................... LS1 passed test NCSecDesc
Starting test: NetLogons
......................... LS1 passed test NetLogons
Starting test: Advertising
......................... LS1 passed test Advertising
Starting test: KnowsOfRoleHolders
......................... LS1 passed test KnowsOfRoleHolders
Starting test: RidManager
......................... LS1 passed test RidManager
Starting test: MachineAccount
......................... LS1 passed test MachineAccount
Starting test: Services
......................... LS1 passed test Services
Starting test: ObjectsReplicated
......................... LS1 passed test ObjectsReplicated
Starting test: frssysvol
......................... LS1 passed test frssysvol
Starting test: kccevent
......................... LS1 passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 07/25/2006 09:09:07
Event String: Driver HP LaserJet 4100 PCL 5e required for

An Error Event occured. EventID: 0x00000452
Time Generated: 07/25/2006 09:09:07
Event String: The printer could not be installed.
......................... LS1 failed test systemlog

Running enterprise tests on : logos-system.org
Starting test: Intersite
......................... logos-system.org passed test Intersite
Starting test: FsmoCheck
......................... logos-system.org passed test FsmoCheck


"Jorge Silva" wrote:

can you post the results for
dcdiag
and
netdiag

--
I hope that the information above helps you

Good Luck
Jorge Silva
MCSA
Systems Administrator

"Rob Power" <RobPower@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:8390E800-55AC-4016-881F-DD22EE66BCBE@xxxxxxxxxxxxxxxx
Server NIC DNS is pointing to itself. Forwarders are set in DNS. They were
set at one point in TCP/IP settings also, but have since been removed.

"Yusuf Dikmenoglu" wrote:

The customer did change ISPs but the
only modifications on the server itself was to the DNS to reflect
the DNS
servers for the new ISP.

As Forwarder in the DNS or in the
TCP/IP Settings from the Server ?

--
Regards from Mainz/Germany
Yusuf Dikmenoglu
http://www.faq-o-matic.net





.