Re: Domain users cannot logon to domain

- The DC1 and DC2 are connected to the same switch/network right?

- You can use the Default-First-Site-Name to host DC1 and DC2
create 2 subnets (DC1 subnet and DC2 subnet) and associate it with the
Default-First-Site-Name, in this case will be
192.168.10.0/24 -> represents DC1, and DC2 subnet

- Create a new Site and associate the subnet 192.168.20.0/24 -> represents
the DC3 subnet, move the DC3 to this new site and remove it from
Default-First-Site-Name.

- Make all DCs, global catalogs. go to each server NTDS Settings, right
click and choose Global Catalog option.

- How about Dns, how did you configured your Dns structure?


--
I hope that the information above helps you

Good Luck
Jorge Silva
MCSA
Systems Administrator

"MartinH" <nick@xxxxxxxxxxxxxx> wrote in message
news:mh7692lbpjhlb3j9qagq8cu9qomi9na53t@xxxxxxxxxx

Jorge.


Do I see the light now? On all DC's I see in AD Sites and Servers a
Default-First-Site-Name and in there is Servers and DC1, DC2 and DC3.

Should i create on the tree root server = DC1 in AD Sites and Services
a new site and move DC3 in there? en then create a new subnet en point
to the Default-First-Site-Name with DC1 and DC2 and to the new Site
with DC3?

Will this then replicate and synchronize to all other DC's?

Martin





.

Relevant Pages

  • Re: Domain users cannot logon to domain
    ... is lost no domain users cannot logon anymore on DC3 and DC2. ... - Make sure that all servers are reachable by FQDN, using Dns Secondary ... DC1: Domain.net ... Primary DNS: DC1 and DNS Suffix Search List: Dc3 and DC2 ...
    (microsoft.public.windows.server.active_directory)
  • Re: Domain users cannot logon to domain
    ... So basicly what you say is i need to activate a GC on DC2 and DC3. ... connected to DC1 and DC2 via a vpn tunnel. ... create a new subnet on DC1 and not on DC2 and DC3. ...
    (microsoft.public.windows.server.active_directory)
  • Re: Logon Server
    ... Everyone was pointing to DC1 or DC2. ... All these user are having the LOGON server as DC3. ...
    (microsoft.public.win2000.active_directory)
  • Re: Adding to the "replicate to" in NTDS settings
    ... bottom section there is a Replicate to: ... dc1 site has vpn to dc2 and dc3 ...
    (microsoft.public.windows.server.active_directory)
  • Re: Domain Controllers not doing their job
    ... My DC> config (DC1 has WINS/DNS and is a GC, DC2 has DNS/WINS,> DC3 is a GC only). ... One site, two different subnets- DC1> is on the subnet with all servers except DC2 and DC3,> which are in another bldg. ...
    (microsoft.public.win2000.active_directory)
Loading