Re: upgrade a Windows 2003 DC to R2

have you ever installed services for unix?
see:
MS-KBQ293783_Cannot Upgrade Windows 2000 Server to Windows Server 2003 with
Windows Services for UNIX 2.0 Installed
(http://support.microsoft.com/?id=293783)

--

Cheers,
(HOPEFULLY THIS INFORMATION HELPS YOU!)
# Jorge de Almeida Pinto #
BLOG --> http://blogs.dirteam.com/blogs/jorge/default.aspx
-----------------------------------------------------------------------------
* This posting is provided "AS IS" with no warranties and confers no rights!
* Always test before implementing!
-----------------------------------------------------------------------------


-----------------------------------------------------------------------------
"tsam" <thomastsam@xxxxxxxxxxx> wrote in message
news:de22b93103bd1180805645c2e9250cb8@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> I am trying to upgrade a Windows 2003 DC to R2 and I am getting this error
> when doing adprep forestprep.
>
> D:\CMPNENTS\R2\ADPREP>adprep.exe /forestprep
>
> ADPREP WARNING:
>
> Before running adprep, all Windows 2000 domain controllers in the forest
> should be upgraded to Windo
> ws 2000 Service Pack 1 (SP1) with QFE 265089, or to Windows 2000 SP2 (or
> later).
>
> QFE 265089 (included in Windows 2000 SP2 and later) is required to prevent
>
> potential domain controll
> er corruption.
>
> For more information about preparing your forest and domain see KB article
>
> Q331161 at http://support
> microsoft.com.
>
> [User Action]
> If ALL your existing Windows 2000 domain controllers meet this
> requirement,
> type C and then press EN
> TER to continue. Otherwise, type any other key and press ENTER to quit.
>
>
> c
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.70" for
> object "CN=uidNumber,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently
> than the schema extension
> needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.71" for
> object "CN=gidNumber,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently
> than the schema extension
> needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.97" for
> object "CN=gecos,CN=Schema,CN=Configuration,DC=xxxx,DC=net" differently
> than
> the schema extension nee
> ded for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.72" for
> object "CN=loginShell,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently
> than the schema extensio
> n needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.92" for
> object "CN=shadowLastChange,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema ex
> tension needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.93" for
> object "CN=shadowMin,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently
> than the schema extension
> needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeSyntax" attribute value for objects defined in Windows 2000
> schema
> and extended schema do
> not match.
>
>
> A previous schema extension has defined the attribute value as "2.5.5.5"
> for
> object "CN=shadowMin,CN
> =Schema,CN=Configuration,DC=xxxx,DC=net" differently than the schema
> extension needed for Windows 200
> 3 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.90" for
> object "CN=shadowMax,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently
> than the schema extension
> needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.91" for
> object "CN=shadowWarning,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema exten
> sion needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeSyntax" attribute value for objects defined in Windows 2000
> schema
> and extended schema do
> not match.
>
>
> A previous schema extension has defined the attribute value as "2.5.5.5"
> for
> object "CN=shadowWarnin
> g,CN=Schema,CN=Configuration,DC=xxxx,DC=net" differently than the schema
> extension needed for Windows
> 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.89" for
> object "CN=shadowInactive,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema exte
> nsion needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.88" for
> object "CN=shadowExpire,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema extens
> ion needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.87" for
> object "CN=shadowFlag,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently
> than the schema extensio
> n needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.86" for
> object "CN=memberUid,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently
> than the schema extension
> needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.79" for
> object "CN=memberNisNetgroup,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema e
> xtension needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeSyntax" attribute value for objects defined in Windows 2000
> schema
> and extended schema do
> not match.
>
>
> A previous schema extension has defined the attribute value as "2.5.5.1"
> for
> object "CN=memberNisNet
> group,CN=Schema,CN=Configuration,DC=xxxx,DC=net" differently than the
> schema
> extension needed for Win
> dows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.74" for
> object "CN=ipServicePort,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema exten
> sion needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.75" for
> object "CN=ipServiceProtocol,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema e
> xtension needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "isSingleValued" attribute value for objects defined in Windows 2000
> schema
> and extended schema do n
> ot match.
>
>
> A previous schema extension has defined the attribute value as "FALSE" for
>
> object "CN=ipServiceProto
> col,CN=Schema,CN=Configuration,DC=xxxx,DC=net" differently than the schema
>
> extension needed for Windo
> ws 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.76" for
> object "CN=ipProtocolNumber,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema ex
> tension needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.81" for
> object "CN=oncRpcNumber,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema extens
> ion needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.82" for
> object "CN=ipHostNumber,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema extens
> ion needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.77" for
> object "CN=ipNetworkNumber,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema ext
> ension needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.78" for
> object "CN=ipNetmaskNumber,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema ext
> ension needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.85" for
> object "CN=macAddress,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently
> than the schema extensio
> n needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.96" for
> object "CN=bootParameter,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema exten
> sion needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.98" for
> object "CN=bootFile,CN=Schema,CN=Configuration,DC=xxxx,DC=net" differently
>
> than the schema extension
> needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.94" for
> object "CN=nisMapName,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently
> than the schema extensio
> n needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "isSingleValued" attribute value for objects defined in Windows 2000
> schema
> and extended schema do n
> ot match.
>
>
> A previous schema extension has defined the attribute value as "FALSE" for
>
> object "CN=nisMapName,CN=
> Schema,CN=Configuration,DC=xxxx,DC=net" differently than the schema
> extension needed for Windows 2003
> server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "attributeId" attribute value for objects defined in Windows 2000 schema
> and
> extended schema do not
> match.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.4.7000.187.95" for
> object "CN=nisMapEntry,CN=Schema,CN=Configuration,DC=xxxx,DC=net"
> differently than the schema extensi
> on needed for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "isSingleValued" attribute value for objects defined in Windows 2000
> schema
> and extended schema do n
> ot match.
>
>
> A previous schema extension has defined the attribute value as "FALSE" for
>
> object "CN=nisMapEntry,CN
> =Schema,CN=Configuration,DC=xxxx,DC=net" differently than the schema
> extension needed for Windows 200
> 3 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> =============================================================================
>
> "governsId" attribute value for objects defined in Windows 2000 schema and
>
> extended schema do not ma
> tch.
>
>
> A previous schema extension has defined the attribute value as
> "1.2.840.113556.1.5.7000.106.58" for
> object "CN=nisMap,CN=Schema,CN=Configuration,DC=xxxx,DC=net" differently
> than the schema extension ne
> eded for Windows 2003 server .
> [Status/Consequence]
> Adprep cannot extend your existing schema
> [User Action]
> Contact the vendor of the application that previously extended the schema
> to
> resolve the inconsisten
> cy. Then run adprep again.
>
>
>
>
> D:\CMPNENTS\R2\ADPREP>
>
>
>


.

Relevant Pages

  • Re: Article 314649
    ... If I need to do adprep, ... A Windows 2003 DC introduction into a Windows 2000 Forest requires a ... Schema Update on the schema Master and domainprep run on the ... Microsoft Windows Server 2003 Service Pack 1 ...
    (microsoft.public.windows.server.active_directory)
  • RE: Migrating from Win2k DCs to Win2k3 DCs; ADPrep question
    ... Windows Server 2003 CD, we need to confirm the following things in Q314649 ... Exchange 2000 Schema Changes Are Installed Before You Run the ... Windows Server 2003 adprep /forestprep Command ...
    (microsoft.public.windows.server.migration)
  • upgrade a Windows 2003 DC to R2
    ... I am trying to upgrade a Windows 2003 DC to R2 and I am getting this error ... when doing adprep forestprep. ... "attributeId" attribute value for objects defined in Windows 2000 schema ... Adprep cannot extend your existing schema ...
    (microsoft.public.windows.server.active_directory)
  • Re: Upgrading Windows 2003 Server SP1 to R2
    ... Before running adprep, all Windows 2000 domain controllers in the forest ... If ALL your existing Windows 2000 domain controllers meet this requirement, ... extended schema do not ... Adprep cannot extend your existing schema ...
    (microsoft.public.windows.server.active_directory)
  • Re: adprep /forestprep fails from W2K3 R2 CD 2
    ... Will this command affect DFS replication? ... We have a Small Business Server 2000 and a ... Adprep was unable to upgrade the schema on the schema master. ...
    (microsoft.public.windows.server.active_directory)